HD Electric DVI-500 Digital Voltage Indicator (500kV)
The DVI emit an audible alarm when voltage above 100VAC is detected. They are very easy to use as there are no range selector switches or settings to be made – just contact the conductor and read the display
The DVI-500 is designed to be used on both transmission and distribution systems in overhead and underground applications. The DVI-500 indicates voltage from 0.1kV – 500kV and is auto-ranging with no range selector switch or settings required.Voltage is displayed on a large 1.45”LED display with a 3-digit readout. In addition, an audible alarm alerts the user to the presence of voltage above 100VAC. The DVI is auto shut-off and will turn off after 4 minutes of inactivity.
Two overhead probes are supplied with the DVI-500 - a large 6”overhead hook probe for transmission system use (HP-DVI-6) and a smaller 2”overhead hook probe for distribution system use (HP-DVI-2). Simply attach the correct probe for the proper overhead application. Use of a hotstick isrequired for all overhead and underground applications.
FEATURES
- For use on system voltages up to 800kV (reads up to 500kV line-to-ground)
- No range selector switch or settings required
- Large LED display indicates the line-to-ground voltage level
- Display is easy to read in bright or dark conditions
- Voltage readout allows the user to distinguish between nominal and induced voltages
- Audible indication when voltage is detected
- Measure elbow test points with the DVI-500T and DVI-100T
- Built-in universal spline for standard hotstick attachment
- Built-in self test to verify proper operation
- Auto shutoff with low battery function
- Powered by a field replaceable 9V lithium or alkaline battery
- Compact, rugged and lightweight polycarbonate housing
- Kits are available, contact factory for details
Weight | 6.000000 |
---|---|
Product Includes | Includes (1) HP-DVI-2 Overhead Hook Probe, (1) HP-DVI-6 Overhead Hook Probe and CS-DVI-5 Rugged Plastic Case |
Specifications | Model Numbers: DVI-500 or DVI-500T Operating Voltage Range: 0-500kV line-to-ground, auto-ranging Operating Frequency: 60Hz (50Hz available) OperatingTemperature Range: -40°F to + 120°F (-40°C to +49°C) Dimensions: Housing: 4.25”H x 7”L x 4.5”D (11cm x 18cm x 11cm) HP-DVI-2 Overhead Probe: 8”L (20cm) HP-DVI-6 Overhead Probe: 12”L (30cm) Weight: 1.37 lb. (0.62 kg) With Small Overhead Probe LED Height: 1.45”(3.7cm) Accuracy: Typical overhead line accuracy in compact overhead three phase configuration +/-10%,otherapplicationsupto+/-25% Power Supply: Field replaceable 9V lithium or alkaline battery Battery Life: About 100 readings with 9V alkaline battery Standard Overhead Probes: (for overhead use only) HP-DVI-2 and HP-DVI-6 |
Manufacturer | HD Electric |
MPN | DVI-500 |