HD Electric PT-DVI Proof Tester for Digital Voltage Indicators
The PT-DVI Proof Tester is for use on the DVI with any available probes. This tester generates high voltage AC for testing the DVI. A properly operating DVI will indicate a voltage of 0.2-0.5kV depending on how the DVI and Tester are held.
The PT-DVI Proof Tester is for use on the DVI with any available probes. This tester generates high voltage AC for testing the DVI. To use, turn on the DVI, hold the Tester in one hand and the DVI in the other. Apply the DVI probe to the metal end plate on the Tester. Press and hold the TEST button on the Tester. A properly operating DVI will indicate a voltage of 0.2-0.5kV depending on how the DVI and Tester are held. For best results, hold both units with a tight grip and wrap your fingers around each unit. If the DVI does not indicate voltage, do not use it and return it to HD Electric Company for service. CAUTION: This Tester generates high voltage AC for testing DVI AC voltage indicators. There is no danger of electric shock when this tester is used as directed. Discontinue use and return to HDE for service if the housing is cracked or broken, or if the battery cover is lost.
| Weight | 1.000000 |
|---|---|
| Specifications | WARNING:Do not use this tester except as directed. Do not use to test equipment other than specified DVI Voltage Indicators. Do not apply to energized circuits or equipment Do not operate this Tester without the battery cover and do not open the housing. Refer all servicing to the factory. Failure to follow these instructions may lead to electric shock, severe injury or death. |
| Manufacturer | HD Electric |
| MPN | PT-DVI |
