Laser Tools GLX58BAC-80 Green Docking Laser Line System
Laser Tools GLX58BAC-80 Green Docking Laser Line System - create green laser runway lights for freight terminals and warehouses
Laser Tools GLX58BAC-80 Green Docking Laser Line System
How a Laser Docking™ System Works If you shine a laser beam onto a floor, you’ll see a dot. If you install line generating optics, the dot will turn into a line. But viewing the dot or line from the point of view beside or behind the laser is not totally revealing. If you stand in front of the laser line generator module and look at the laser line, the increased brightness is noticeable. This is because you are viewing the incident light reflected off of the floor. Also the viewable line is much longer. This means that the brighter laser line can be seen in low ambient light conditions and farther away from the laser module itself.
Backing 53’ trailers centered to loading docks is time consuming, dangerous and error prone. Trailer and terminal docks are regularly damaged. Use the GLX series green laser lines to stripe trailer loading lanes. This results in faster and more accurate trailer docking. Laser lines are visible on all surfaces including water, mud, gravel and snow! Works best during morning, evening and night times.
- Laser Guide Beams easily viewed in backup mirrors:
- Center trailers to docks during backups.
- Separates Trailers
- Lasers replace painted lines and tape
- Minimizes damage to trailers and docks
- Faster loading and unloading trailers
Loading Dock Laser Guide Beams This is why Laser Tools Co.’s Laser Docking™ System is the perfect trailer docking assistant. A driver can “see” the laser docking lines in his wing mirrors when the truck and trailer are approaching the docking lane. This guides the driver while backing up to the loading dock. Also, the laser lines provide a visual indication that the trailer is centered to the loading dock.
Each complete Laser Tools Co.’s Laser Docking™ System includes the following: 1 GLX58BAC-30 Laser Alignment tool 1 Beam Spreader to define the line at both ends 1 30° Line Generator lens 1 AP94 mounting bracket 1 5ft of cable with an AC adapter for input power of 110v
| Weight | 3.000000 |
|---|---|
| Product Includes | laser system, mounting bracket and power cord |
| Specifications | Class IIIa <5mW@520nm laser system with mounting bracket. Line Generator with a 30° Angle of Divergence. Input Power: 110VAC |
| Manufacturer | Laser Tools |
| MPN | GLX58BAC-80 |