Control Company 4337 Hi-Accuracy Dual Traceable Thermometer

TRACEABLE® HI-ACCURACY DUAL THERMOMETER

• Dual-probe unit provides exact results for critical requirements, quality control, routine readings
• Two probes are useful for monitoring inlets and outlets, tracking two tests simultaneously or measuring temperatures in two locations
• Display shows current °F/°C and minimum/maximum temperatures
• Minimum/maximum monitors readings overnight, on weekends, or any time period; unit displays the exact time and date when the minimum and maximum temperature occurred
• Visual/audible alarms are programmable in 0.1° increments and provide alerts when temperature rises above/falls below high/low set points

NEW HI-ACCURACY TRACEABLE THERMOMETER READS TO 0.01 DEGREES

Thermometer range is –58 to 158°F and –50 to 70°C with a resolution of 0.01° and accuracy of ±0.3°C. Unit reads in °C and °F. Traceable International Standards Digital Thermometer provides the exact readings required for critical requirements, quality control checks, and routine measurements. Two channel thermometer is available with one probe or two probes.

UNIT CONFORMS TO ITS-90, INTERNATIONAL TEMPERATURE STANDARD

Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvettes, gas systems, reagents, incubators, pharmaceuticals, petroleum products, foods, wastewater, and when using pH/conductivity standards.

RECORDS TIME AND DATE FOR MIN/MAX READINGS AND HI/LO ALARM ALERTS

Display shows minimum/maximum and current temperatures. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range.

IMPERVIOUS STAINLESS-STEEL PROBE

Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet.

TRACEABLE® CERTIFICATE

Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2005 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. High-impact, chemical-resistant ABS plastic case is 2-3/4 x 4-1/4 x 3/4 inches. Weight is 5 ounces. Stand, Velcro®, magnetic strips, and wall mount allow placing thermometer anywhere. Supplied with a Traceable® Certificate, stainless-steel probe(s), and two AAA batteries for continuous, 1-year always-on monitoring.