UE Systems UP100KT Complete Ultraprobe 100 Ultrasonic Leak Detector Kit

$1,695.00
Mitchell Part Number
UEJ-UP100KT
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

UE Systems Ultraprobe 100 Ultrasonic Leak Detector Kit - UP100KT complete kit with all standard accessories

UE Systems Ultraprobe 100 Ultrasonic Leak Detector Kit - UP100KT Complete Kit

The UP100KT is the complete kit that includes Headphones, stethoscope probe, airborne scanning probe, focusing probe, and ultrasonic warble tone generator

Ultrasonic Leak Detection is the Ideal tool for Pressure/Vacuum Leak Detection,  Valve Seat Leak Detection, Exhaust System Leaks, Heat Exchangers, Steam Trap Inspection, Bearing Testing, Gear/Gear Box Inspection, General Mechanical Inspection and Troubleshooting, Wind Noise/Water Leaks, Tanks, Pipes, etc. Leak Testing, and Electrical Inspection (compares to SKF CMIN 400-K)

UP100 pistol housing with LED bargraph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, warble tone generator with battery recharger, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.

Features

  • General purpose kit for use with a stethescope probe. See applications above.
  • Contact ultrasonic listening allows detection of faulty equipment
  • Optional remote transmitter ("warble" tone generator) can be used for tank leak testing (instead of pressure test); transmits ultrasound through leaks, which is detected and displayed by the meter
  • Inspect rotating machinery for early detection of possible gear and bearing failures
  • Ultrasonic frequency range 20kHz and 100kHz; plus
  • Eliminates extraneous plant noise with noice cancelling headset.
More Information
Weight 7.000000
Product Includes UP100, scanning module, rubber focusing probe, stethoscope probe, warble tone generator, headphones, battery, case and manual
Specifications

Construction: Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures
Circuitry: SMD/Solid State hybrid heterodyne receiver
Frequency Response: 20-100 kHz (centered at 38-42 kHz)
Indicator: 10 segment LED bargraph (red)
Sensitivity Selection: 8 position precision attenuation
Power: 9 Volt Alkaline Battery
Low Battery Voltage Indicator: LED
Headset: Noise isolating type: double headset wired monophonic impedance; 16 ohms. Over 23 dB noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
Probes:
Scanning Module (SCM-1) Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1) Stainless Steel plug-in type with 5.5" Stainless Steel Waveguide.
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signals.
Transmitter: Patented warble tone transmission
Response Time: 300 m. sec.
Ambient Operating Temperature Range: 32°-120°F(0°-50°C)
Relative Humidity: 10-95% non condensing at up to 86°F(30°C)
Storage Temperature: 0°-130°F (-18°-54°C)
Warranty: One year, parts/labor. (Details available on request)
Dimensions: 5.25" x 2" x 8" (13.3cm x 5cm x 20.3cm)
Weight: 11 oz (.3kg)
Carrying Case: Nylon soft carry case with die cut foam

 

UE SYSTEMS ULTRAPROBE 100 SERIES APPLICATION SELECTION CHART
Application/Kit # UEJ-100C UEJ-100S UEJ-100SC UEJ-100STG UEJ-100KT
Pressure and Vacuum Leak Detection   X X X
Valve Seat Leak Detection X    X   X
Exhaust System Leaks   X X X  X
Heat Exchangers, Boiler, Condensers   X X X  X
Steam Trap Inspection X   X   X
Bearing Testing X    X   X
Gear/Gear Box Inspection X    X   X
Wind Noise/Water Leaks        X  X
General Mechanical Inspection and Troubleshooting X   X   X
Tanks, Pipes, etc. Leak Testing   X X X X
Electrical Inspection   X X X  X

 

Manufacturer UE Systems
MPN UP100KT
You're reviewing: UE Systems UP100KT Complete Ultraprobe 100 Ultrasonic Leak Detector Kit
Your Rating