Megger DETEX 514500-4 Analog Phasing Voltage Tester (6.9 - 34.5kV Phase-to-Phase)
$0.00
Mitchell Part Number
AVO-514500-4
Manufacturer
Availability
Out of Stock
Quick overview
Discontinued
- Units for use on higher voltages are fitted with a universal spline mount for attachment to a standard hot stick. Spline-mounted testers provide a 10-ft (3-m) nominal spacing between two energized phases.
- Provides continuous monitoring with no on/off switch. They respond to minimum phase-to-ground voltages as outlined by ANSI C84.1 standards, with conformance to IEC guidelines for capacitive high-voltage test instruments.
- Prior to testing, a self-test may be activated on the electronic detectors at the push of a button. The test simulates application of external voltage to the probe electrode, which verifies the operation of the buzzer and lights a red LED. When the TEST button is released, a green LED indicates the detector is operative and ready for use. If voltages within the detector’s operating range are present during testing, the green LED extinguishes, the red LED flashes and the audio tone sounds until the detector is removed from the voltage source.
- Used to check high voltage fuses, test for correct phase connections, and check for absence of high voltage on de-energized lines or other electrical apparatus
- Ideally suited for outdoor testing of grounded and ungrounded systems and in any other area where neon indicators are not easily seen. All ratings per ANSI C84.1, with conformance to IEC guidelines for capacitive high-voltage test instruments. All are self-powered. The kilivolt indicator markers are: 0, 4.2kv, 7.2kv, 13kv, 25kV and 35kv
| Weight | 17.000000 |
|---|---|
| Product Includes | Spline Fitted for attachment to universal hotstick(s) |
| Specifications | Nominal System Voltage Range, 50 /60 Hz (phase to phase): 6.9 to 34.5kV Kilovolt Indicator Markings: 0, 4.2, 7.2, 13, 25, 35 Style: Spline fitted for attachment to universal hotstick Pole Length: 33 inches Cable Length (Between Poles): 9 feet |
| Manufacturer | Megger |
| MPN | 514500-4 |
You may also need
