Mitchell Instrument 40 Cal Arc Flash Hood with Air Flow System, Protective Clothing and Class 2 Glove Kit

An electrical hazard such as Arc Flash can be devastating. In a fration of a second, Arc Flash generates a wave of intense radiant heat that can ignite, melt, or break open a worker's clothing, causing severe and sometimes fatal burns. Wearing the right Arc Flash personal protective equipment will minimize or prevent skin burns, while providing all four categoires of NFPA 70E protection.

Arc Flash Protection Hoods are available with an optional integrated cooling system which provides additional air flow and cools the worker. This unit is excellent in warm conditions or confined spaces. The easy to wear system is lightweight, compact, and easy to use and is designed to provide the worker with approximately 80cfm of air flow throughout the breathing zone. The unit is powered by 8 AA batteries and is designed to maintain a useful continuous life of up to 35hrs at 80cfm. The unit is non-filtered and is not considered a respirator. This Cooling System measures 7” wide and 14” long and the fan measures 4.5” x 4.5”. The reinforcing “dome” for the air intake fan is covered in Indura Ultra Soft®. The battery pack is housed in a 5” x 7” pocket made from Indura Ultra Soft®.

All standard Arc Flash clothing are manufactured to ASTM 1506-98 and complies with both OSHA 1910.269 and the current NFPA 70E.

Adding to your electrical supply are the Class 2 rubber gloves, which offer a high level of comfort and flexibility. Incorpotating high dielectric and physical strength, all gloves exceed ASTM D120. When doing electrical work, the Max Voltage usage on Class 2 gloves is 17,000v.

This kit contains:

40 Cal Arc Flash Jacket

40 Cal Arc Flash Bib overalls

40 Cal Arc Flash Hood with Air System

Orange Safety Helmet

14'' Class 2 Black Electrical Insulating Rubber Gloves

Class 2 Leather Glove Protectors

Glove Bag

Safety Glasses

Orange Apparel Bag