HD Electric IEP-UD/C Insulated Underground Bushing Probe
$390.00
Mitchell Part Number
HDJ-IEP-UD/C
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview
The IEP-UD/C Underground Bushing Probe is designed for direct insertion into exposed 15, 25 or 35kV loadbreak bushings (after connecting elbows have been removed and properly stored).
The probe must be inserted directly into the bushing and remain free and clear of all surrounding surfaces. It is rated for use up to 21kV phase-to-ground. This probe should also be used in metal clad switchgear or any other applications where grounded or other live conductors may be in close proximity to the conductor being tested. TO
ASSEMBLE THE IEP-UD/C PROBE ON THE TAG-5000:
- Inspect the IEP-UD/C probe for any mechanical defects andmake certain it is clean and dry.
- Remove the overhead probe and screw the IEP-UD/C ontoeach TAG-5000. Make certain it is snug by hand tightening,but DO NOT OVERTIGHTEN.
- Test the fully assembled TAG-5000 on a known voltagesource prior to using.
| Weight | 1.000000 |
|---|---|
| Manufacturer | HD Electric |
| MPN | IEP-UD/C |
| Manufacturer Warranty | 1 Year |
| Mitchell Catalog Number | 9UIEPDVI, 8UIEPDVI, 7UIEPDVI, 6UIEPDVI, WBIEPDVI, IEPDVI, |