- arc flash apparel
- arc flash equipment
- arc flash hood
- arc flash kits
- arc flash suits
- arc hood
- clamp meters
- clamp on meter
- class 0 gloves
- class 00 gloves
- class 2 gloves
- flash hood
- flash hoods
- high voltage glove
- high voltage kit
- high voltage safety equipment
- high voltage safety gloves
- protection hood
- safety equipment
UE Systems Ultraprobe 550 Ultrasonic Detection Kit
UP550 metered pistol housing, ten turn potentiometer, numerically calibrated sensitivity dial with selection lock; Trisonic Scanning Module; Rubber Focusing Probe; Heavy Duty Stethoscope Module with extension probe kit; Deluxe Industrial Headset; battery recharger; nylon soft carrying case with die-cut foam; Comprehensive instruction manual and VHS training tape
ANALOG ULTRASONIC INSPECTION SYSTEM
Ultrasonic Leak Detection & Mechanical Inspection so sensitive it can hear the human eye blink.
Designed for ease of use, it often takes no more than 15 minutes to become competent in testing with the ULTRAPROBE 550.
Fast accurate diagnosis through the ULTRAPROBE 550 system will dramatically reduce unplanned downtime and shorten planned outage time.
The ULTRAPROBE 550 heterodynes ultrasound to the audible range providing accurate sound reproduction.
Ultraprobe's versatility makes it ideally suited to work with any plant program:
- Predictive maintenance (PDM)
- Energy Conservation
- Quality Assurance (QA/QC)
- Total Productive Maintenance (TPM)
- Process Safety Management (PSM)
Ultraprobe provides data acquisition through three modes:
- Auditory Channels (via an acoustically isolating headset)
- Analog Meter
- Demodulated Signal for vibration data collectors and FFT's
|Product Includes||*Check product description*|
ULTRAPROBE 550 SPECIFICATIONS
CONSTRUCTION:Hand held metered pistol type made with anodized aluminum and ABS plastic
FREQUENCY RESPONSE:Detect ultrasonic frequencies between 20 kHz and 100kHz, continuously variable. Frequencies are converted to 100 Hz to 3 kHz audio.
Rubber Focusing Probe (flexible) slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit is at maximum sensitivity.
Stethoscope Module: plug-in type, insulated probe with RF shielding; 4 1/2" (11.4 cm) long steel probe tip, conically shaped for uniform surface contact. Probe tip is interchangeable. Stethoscope Extension Kit: 3 piece, segmented metal rods to increase stethoscope contact range 20" (50.8.cm) and 31" (76.2 cm).
TRANSMITTER: Patented warble tone transmission
HEADSET: Noise isolating type: double headset wired monophonic, impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
INDICATORS: Ballistic output meter: linear calibration scale of 0-100 for logging relative measurements. Meter is accurate 1% throughout entire scale. Low level Battery LED indicator for main housing internal power supply.
BATTERIES: Self contained nickel-cadmium rechargeable. RECHARGING SYSTEM: Standard 110V. Also available in 220V.
FEATURES: Sensitivity Control, A 10 turn numerically calibrated adjustable potentiometer. Spring loaded trigger switch.
OVER-ALL SIZE: Complete kit in Zero Haliburton aluminum carrying case: 15" x 22" x 7" (38.1 x 55.9 x 17.8 cm). Pistol unit 2 lbs (.9kg). Complete carrying case: 14 lbs (6.4 kg).
SENSITIVITY: Detects .005" (.127 mm) dia. leak @ 5 psi (.34 bar) at a distance of 50 ft
THRESHOLD*: 1 X 10-² 1 X 10-³ std. cc/sec. freon
WARRANTY: 5 Years parts/labor
ULTRAPROBE versatility extends to ordering with customized kits available on request.
ULTRAPROBE 550 KIT: Meets and exceeds ASTM E1002-93 requirements for Leak Detection.
Ultraprobe 550 Series Selection Chart