UE Systems UP100SC UltraSonic Leak Detector Stethoscope Ultraprobe 100 Scanner Kit

$1,395.00
Mitchell Part Number
UEJ-UP100SC
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview
UE Systems UP100SC UltraSonic Leak Detector Stethoscope / Scanner Kit - Ideal tool for Pressure/Vacuum Leak Detection, Valve Seat Leak Detection, Exhaust System Leaks, Heat Exchangers, Steam Trap Inspection, Bearing Testing, Gear/Gear Box Inspection, General Mechanical Inspection and Troubleshooting, Wind Noise/Water Leaks, and Electrical Inspection

UE Systems UP100SC UltraSonic Leak Detector Stethoscope Ultraprobe 100 Scanner Kit

UP100 pistol housing with LED bargraph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.

 

Features

  • General purpose kit for use with a stethescope probe. See applications above.
  • Contact ultrasonic listening allows detection of faulty equipment
  • Optional remote transmitter ("warble" tone generator) can be used for tank leak testing (instead of pressure test); transmits ultrasound through leaks, which is detected and displayed by the meter
  • Inspect rotating machinery for early detection of possible gear and bearing failures
  • Ultrasonic frequency range 20kHz and 100kHz; plus
  • Eliminates extraneous plant noise with noice cancelling headset.
More Information
Weight 7.000000
Product Includes *Check product description*
Specifications

Construction: Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures
Circuitry: SMD/Solid State hybrid heterodyne receiver
Frequency Response: 20-100 kHz (centered at 38-42 kHz)
Indicator: 10 segment LED bargraph (red)
Sensitivity Selection: 8 position precision attenuation
Power: 9 Volt Alkaline Battery
Low Battery Voltage Indicator: LED
Headset: Noise isolating type: double headset wired monophonic impedance; 16 ohms. Over 23 dB noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
Probes:
Scanning Module (SCM-1) Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1) Stainless Steel plug-in type with 5.5" Stainless Steel Waveguide.
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signals.
Transmitter: Patented warble tone transmission
Response Time: 300 m. sec.
Ambient Operating Temperature Range: 32°-120°F(0°-50°C)
Relative Humidity: 10-95% non condensing at up to 86°F(30°C)
Storage Temperature: 0°-130°F (-18°-54°C)
Warranty: One year, parts/labor. (Details available on request)
Dimensions: 5.25" x 2" x 8" (13.3cm x 5cm x 20.3cm)
Weight: 11 oz (.3kg)
Carrying Case: Nylon soft carry case with die cut foam

 

UE SYSTEMS ULTRAPROBE 100 SERIES APPLICATION SELECTION CHART
Application/Kit # UEJ-100C UEJ-100S UEJ-100SC UEJ-100STG UEJ-100KT
Pressure and Vacuum Leak Detection   X X X
Valve Seat Leak Detection X    X   X
Exhaust System Leaks   X X X  X
Heat Exchangers, Boiler, Condensers   X X X  X
Steam Trap Inspection X   X   X
Bearing Testing X    X   X
Gear/Gear Box Inspection X    X   X
Wind Noise/Water Leaks        X  X
General Mechanical Inspection and Troubleshooting X   X   X
Tanks, Pipes, etc. Leak Testing   X X X X
Electrical Inspection   X X X  X
Manufacturer UE Systems
MPN UP100SC
You're reviewing: UE Systems UP100SC UltraSonic Leak Detector Stethoscope Ultraprobe 100 Scanner Kit
Your Rating