SKF TKBA 10 Red Laser Pulley and Sprocket Belt Alignment Tool

$0.00
Mitchell Part Number
SKF-TKBA10
Manufacturer
Availability
Out of Stock
Quick overview
Discontinued

SKF TKBA 10 Red Laser Pulley and Sprocket Belt Alignment Tool

The SKF TKBA 10 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

  • Powerful magnets allow fast and easy attachment.
  • Facilitates simultaneous adjustment of tension and alignment.
  • Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets.
  • SKF TKBA 10 utilises a red laser and can be used for distances up to 3 m (10 ft).
  • Sturdy aluminium housings help ensure assembly stability and accuracy during the alignment process.
More Information
Weight 3.000000
Product Includes Laser unit, receiver unit, batteries, calibration certificate and hard padded carrying case
Specifications

Measurement distance: 50 mm to 3 m (2 in to 10 ft)
Mounting: Magnetic, side mounted
Housing material: Extruded aluminium
Laser wave length: 635 nm
Laser class: 2
Maximum laser power: 1 mW
Measurement accuracy: Angular better than 0.02° Linear better than 0.5 mm
Battery life: 25 hours continuous operation
Calibration certificate: valid for two years
Warranty: 12 months

size 6.65" x 2.0" x 1.5" (transmitter) - 6.5" x 2.0" x 1.5" (receiver)
Power Supply two "AAA" batteries
Manufacturer SKF
MPN TKBA 10
You're reviewing: SKF TKBA 10 Red Laser Pulley and Sprocket Belt Alignment Tool
Your Rating