Shimpo DT-315A Heavy Duty Xenon Stroboscope with Internal Battery***DISCONTINUED***

Flashing Range 40.0 - 35,000 fpm (flashes per minute)
Accuracy ±0.01 % of reading
Resolution 0.1 fpm: 40.0 - 5,000 fpm / 0.2 fpm: 5,001 - 8,000 fpm /
0.5 fpm: 8,001 - 10,000 fpm / 1 fpm: 10,001 - 35,000 fpm
Phase Shift Use +/- push buttons (360° in 6 seconds)
Display Update Time 0.2 sec approx
Output Signal Synchronous, 400 μsec. Pulse output, 0 to +12 VDC amplitude(approx.), 4.7 KΩ impedance
Rate Multiplier/Divide 0.0 to 35,000 fpm
Flashing Range Synchronous Mode: 60.0 ~ 3,000FPM / Delay mode:200 ~ 3,000 FPM
External Mode Accuracy ±0.01 % ±1 digit
Phase Shift 0 to 359° with 1° resolution
Delay Time 0 to 2,000 mSec from 40 - 10,000 fpm
External Trigger Input Signal LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open collector (NPN),pulse width 50 μsec min.
Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V
Display 5 digits, 0.4” (10 mm) high, LED
Flashtube Power/Life Xenon, 10 W max. (100 million flashes)
Flash Duration 10 to 40 μs automatically adjusts with flash rate
Lux Rating
8” (20 cm) Distance = 4500 lx @ 1500 fpm, 3375 lx @ 6000 fpm with 4.5” (110 mm) irradiation
diameter.
20” (50 cm) Distance = 1300 lx @ 1500 fpm, 930 lx @ 6000 fpm with 10” (250 mm) irradiation
diameter.
Sensor Power Supply 12 VDC (40 mA)
Low Battery Indicator Display shows all L’s
Battery Life 1 - 2 hours depending on flash rate
Power Requirement Rechargeable Battery or AC Line Power with included AC adapter
Operating Temperature 32 - 104°F ( 0 - 40°C )