Salisbury TK30 - 29 Piece Insulated Tools Kit - Deluxe Maintenance Tool Kit
$3,600.16
Mitchell Part Number
SAL-TK30
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview
Salisbury by Honeywell TK30 - 29 Piece Insulated Electrician Tool Kit - Deluxe Maintenance Tool Kit
br>Insulated tools rated for up to 1,000 VAC exposure and dielectrically tested at 10,000 VAC
br>Meets or exceeds ASTM F1505-07 and IEC 900 standard
br>Helps you to be compliant with OSHA and NFPA 70E requirements
br>Impact resistant and flame retardant two-color insulating material
br>Made in U.S.A.
Salisbury by Honeywell TK30 - 29 Piece Insulated Electrician Tool Kit - Deluxe Maintenance Tool Kit
br> br>
The Salisbury TK30 is a 29 Piece Insulated Tool Set designed for electricians going from job site to job site. The tools are nicely organized and easily transported in a hard case. These 1,000 Volt rated electrician tools are ideal for every electrician out there.
br> br>
If you would like this set in metric units, check out SAL-TK30M.
br>TK30 Includes
br>Slotted Screwdrivers: 1/8 x 2", 3/16 x 4", 1/4 x 6"
br>Phillips Screwdriver: #1 x 3", #2 x 4"
br>Torque Wrench: 30-150 in/lbs
br>3/8" Drive Reversible Ratchet
br>3" and 6" Extensions, 3/8" drive
br>8 pcs. 3/8" to 13/16" Deep 12 pt. Socket Set, 3/8" Drive
br>8 pcs. 3/8" to 13/16" Box End Wrench Set
br>7-1/2" Diagonal Cutting Pliers
br>8" Needle Nose Pliers
br>9" Lineman Pliers
br>Mini Flashlight
br>And a high impact plastic tool box
Warning: Salisbury insulated tools are to be used as secondary protection and are not intended to be used in place of other personal protective equipment. Whenever possible, always de-energize lines before working on or around them. Although the insulation on Salisbury tools is impact resistant and flame retardant, each tool should be inspected prior to each use for cracks, cuts or other damage. Should the yellow insulation become visible through the orange outer layer, discontinue use immediately. br> Please Remember: Operating with Insulated Tools should be used with Dielectric Gloves
Warning: Salisbury insulated tools are to be used as secondary protection and are not intended to be used in place of other personal protective equipment. Whenever possible, always de-energize lines before working on or around them. Although the insulation on Salisbury tools is impact resistant and flame retardant, each tool should be inspected prior to each use for cracks, cuts or other damage. Should the yellow insulation become visible through the orange outer layer, discontinue use immediately. br> Please Remember: Operating with Insulated Tools should be used with Dielectric Gloves
Weight | 30.000000 |
---|---|
Manufacturer | Salisbury |
MPN | TK30 |
Mitchell Catalog Number | SAL-TK30 |