Mitchell Instruments forTest and Measurement, Safety, NFPA 70E Arc Flash

Skip to Main Content »

Search Site
Welcome! Have Questions? Call us at: (888) 270 2690

Noram SMC PTE-100-C Current and Voltage Relay Test Set

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Noram SMC PTE-100-C Current and Voltage Relay Test Set

SMC PTE-100-C Current and Voltage Relay Test Set

Mitchell Part Number: NOR-PTE-100-C

Availability: Typically In stock - Call if Urgent!

$7,150.00

PDF Downloads:
Product Datasheet
Add Items to Cart Add to Cart

Quick Overview

The Noram SMC PTE-100-C Current and Voltage Relay Test Set has a variable AC output Current up to 250 Amps, a variable AC Voltage output up to 250 Volts and a variable DC Voltage output up to 350 Volts.  All-in-One Design fills almost any relay testing needs!

Be the first to review this product

• Variable Output Current to 250A in Four Ranges
• Variable AC Output Voltage to 250V (4A)
• Variable DC Output Voltage to 350V
(2.8A)
• Built-in timer with 1ms resolution
• Output power: 1000VA
• Auxiliary DC power supply to
250V
• Electronic protection in all
outputs


This compact, 30-pound unit packs a 1000VA punch in its current
output taps.This unit is transformer based with a variac control.


It can also measure phase-angle between output
current & compliance voltage (impedance angle of
load), between output current & an external voltage,
or between an external current and voltage. On-board
timer will display in seconds or cycles, and can be
activated with a contact open/close or voltage
applied/removed. Timer can also be used to measure
duration of above states. There are also many preset
features on the unit that can be utilized, including an output
current limit and/or a maximum time duration for the output to protect
the device being tested. It also features "Imax", which enables unit to capture
maximum current output when testing instantaneous trip points. Unit can be operated
manually, or it can be computer controlled to meet application requirements.


APPLICATIONS
- Testing of overcurrent and minimum/maximum voltage relays.
- Testing of overcurrent directional relays (with load option).
- Testing of reclosing devices (with external timer option).
- Testing of dc relays.
- Testing of MCB’s.
- Verification of the knee point in current transformers.

Product Includes test set, two 6-ft. high current output leads, six 6-ft. test leads, six alligator clips, two adapter plugs, RS-232 serial download cable, nylon protective case & 120VAC power cord
Specifications

- Variable current output up to 250 A.
- Variable AC voltage output up to 250V.
- Variable DC voltage output up to 350V.
- Variable auxiliary DC power supply to 250V.
- Auxillary AC voltage output of 110V.
- Outputs are fully isolated and Electronically protected.
- Timer resolution: 1 ms.
- Contains Voltmeter, ammeter, frequency meter, measures apparent
power, impedance, and internal and external phase angles.
- Control of injection time and the maximum value injected.
- Current can be pre-selected.
- 1,000VA for 1 minute.
- RS-232 Serial Port & PTE-BUS Port.

size 8 x 12 x 8 in
Shipping Weight 35.0000
Power Supply 120 VAC 60 Hz
Manufacturer Noram SMC
MPN PTE-100-C
Manufacturer Warranty 1 Year
Mitchell Catalog Number 7ZPTE100C, 8ZPTE100C, 9ZPTE100C, WBPTE100C

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.



Thank You For Shopping with Mitchell Instrument Company Inc.® - 1570 Cherokee St. San Marcos CA 92078 - Call Toll Free: (888) 270 2690 - Fax (800) 648 2411