Martel Electronics DMC-1410 Documenting Multifunction Calibrator

$0.00
Mitchell Part Number
MHJ-1920002
Manufacturer
Availability
Out of Stock
Quick overview
Discontinued

• ±0.4°C thermocouple/±0.3°C RTD accuracy
• ±0.015% of reading electrical accuracy
• Ten (10) T/C types and eight (8) RTD types, plus YSI 400
• Read and source modes
• Full Function 4 to 20 mA read, source, simulate and
read/power modes with ±0.015% of reading accuracy
• Source or read 0 to 20 volts (±0.015% of reading accuracy)
• Measure 0 to 250 VDC or VAC
• Direct keyboard entry enables quick output changes
• Store up to nine (9) setpoints for each output function
• RTD function compatible with all pulsed transmitters

More Information
Weight 4.000000
Product Includes Calibrator, NIST Certificate, test leads, four “AA” batteries, and rubber molded protective holster
Specifications

T/C Ranges: J, K, T, E, R, S, N, B, L, U including -10 to 70 mV range
RTD Ranges: Pt 385 (100, 200, 500, 1000 ohms); Pt 392, JIS, Ni 120, CU10, YSI 400
Resistance Ranges: 0Ω to 400.00Ω and 400.0Ω to 3200.0Ω mA Range: 0 to 24.00 mA
Voltage Range: read/source 0-20.000 Volts DC, Read only 0-250 Volts DC or AC
Frequency Range: 0-1000.0 CPM, 0-1000 Hz, 0-10 kHz
Continuity Function: 0 to 400.0 Ohms (audible tone when under 10 ohms)
Pressure Measurement: requires external pressure modules, 29 ranges available - please call
Oper. Temp: -10 to 50°C Storage Temp: -40 to 60°C

size 8.5 x 4.8 x 2.1 (1.8Lb)
Power Supply 4 “AA” batteries, 25 hours typical use
Manufacturer Martel / Beta
MPN DMC-1410
Manufacturer Warranty 1 year
You're reviewing: Martel Electronics DMC-1410 Documenting Multifunction Calibrator
Your Rating