Megger DET3TD Three Point Ground Tester

Regular Price $1,300.00
Show Tooltip See Price In Cart
Mitchell Part Number
AVO-DET3TD
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

Megger DET3TD Three Point Ground Tester - For basic requirements it provides digital ground testing and bond testing capabilities

Megger DET3TD Three Point Ground Tester

  • 2 and 3 point testing
  • User selectable test voltage (25/50 V)
  • Choice of digital or analog display
  • Warning indicators prevent test failure
  • IP54 rated
  • Complete with leads, stakes and rugged carry case
  • Simple one button operation

Proper grounding provides many varied benefits to both people and facilities. It lessens the chance of injury due to faulty installation, reduces the likelihood of damage from lightning strikes and induced voltages, improves the performance of computer, communication and other sensitive equipment and protects against static electricity from friction. Over time, ground systems can degrade or become ineffective.


Corrosion and weather influences exert mechanical strain on ground rods and cause metallic corrosion. Catastrophic events like lightning strikes or large fault currents can cause instant degradation. In addition, facility expansion can create different ground system needs. The risks from ground system deterioration include potentially deadly electrical shock situations, plant-wide equipment damage, disruption in the performance of sensitive equipment and heat build-up on a single piece of electrical equipment.

The maintenance of an adequate low resistance ground connection is essential to both the protection and performance of any electrical system. Ground testing should be performed both upon installation, to meet design specification, and periodically thereafter in order to maintain service. All models can also perform bonding tests (using an ac signal), to determine that adequate connection has been made from equipment to the grounding system.
.


Grounding electrodes from simple to complex systems can
be tested, including:

  • Primary and secondary electrical grounding systems
  • Utility pole grounds
  • Lightning protection systems
  • Residential grounds
  • Machinery safety grounds
  • Computer and communication system grounds
  • EMI/RFI system grounds
  • Antenna and pedestal grounds
  • CATV system grounds

 

More Information
Weight 8.000000
Product Includes DET3TD Tester, three color coded test leads, ground rods, 8 "AA" batteries, and hardshell case
Specifications

SPECIFICATIONS
Resistance range: 0.01 to 2000 autoranging
Resistance accuracy:
2P measurements 2% ±3 digits
3P measurements 2% ±3 digits
ART measurements5% ±3 digits
Maximum probe resistance
Rp limit: 100k½ (50V output voltage)
Rc limit: 100k½ (50V output voltage)
Limits reduced to 50k½ for 25V output voltage
Limits reduced to 5k½ for 0.01 ½ resolution
Earth voltage range: 0 – 100 V
Earth voltage accuracy: 2% ±2 V
2- and 3-wire test: Yes
Ground current accuracy: 5% ±3 digits
Display: LCD
Test frequency: 128 Hz
Test voltage: 25 V or 50 V, user selectable (factory setting 50 V)
Test current: 450 micro-amps
Noise rejection: 40V pk to pk
Noise check: Automatic
C spike check: Automatic
P spike check: Automatic
Maximum current loop resistance: 100 k-ohms at 50V,
50 k-ohms at 25 V and 5 k-ohms for 0.01 ohm resolution for
readings below 19 ohms
Maximum voltage probe resistance: 100 k-ohms at 50V,
50 k-ohms at 25 V and 5 k-ohms for 0.01 ohm resolution for
readings below 19 ohms
Battery type: 8 1.5 V AA cells
Battery life: 3 hours, 700 consecutive tests
Safety: EN61010-1 CAT IV 100 V
Terminals: 4 mm plug type (test leads)
Ingress protection: IP54
EMC: Meets the requirements of EN61326-1:1998 for use in
heavy industrial areas

Operating temperature range: -5º to +131º F (-15º to +55º C)
Storage temperature range: -40º to +158º F (-40º to +70º C)
Humidity: 95% RH non-condensing at 104º F (40º C)

size 8 x 5.7 x 3.2" meter only (2.2 lbs)
Power Supply eight "AA" batteries
Manufacturer Megger
MPN DET3TD
Mitchell Catalog Number 7ZDET3TD, 8ZDET3TD, 9ZDET3TD, WBDET3TD,
You're reviewing: Megger DET3TD Three Point Ground Tester
Your Rating