Fluke 771 Process Clamp Meter with PIE-334 VALUE KIT

Special Price $1,731.60 Regular Price $1,924.99
Mitchell Part Number
MMJ-VAL771
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

The Fluke 771 / PIE-344 VALUE KIT is the ultimate troubleshoot and calibration combo. It was designed to save you time and money, by eliminating time wasting activities.

• Fluke 771 MILLIAMP PROCESS CLAMP METER
• PIE 334 mA Loop Calibrator

FLUKE 771 MILLIAMP PROCESS CLAMP METER
•   Best in class 0.2 % accuracy
•   0.01 mA resolution and sensitivity
•   Measure 4 to 20 mA signals without ”breaking the loop”
•   Measure mA signals for PLC and control system analog I/O
•   Dual backlit display with both mA measurement and percent of 4 to 20 mA span
•   Measurement Spotlight illuminates hard to see wires in dark enclosures
•   Detachable clamp with extension cable for measurements in tight locations
•   Measure 10 to 50 mA signals in older control systems using the 99.9 mA range<
•   Automatically change the 4 to 20 mA output for remote testing
•   Power saving features, auto-off, backlight timeout extend battery life
•   Hold function captures and displays changing measurements

Practical Instruments 334 Loop Calibrator
•   Much more responsive display makes for easier and faster adjustments
•   Protective rubber boot for toolbox toughness
•   1000% improvement in battery life allows up to 125 hours of nominal use per battery change
•    Source 0.00 to 24.00 mA (-25% to 125%)
•    Read 0.00 to 52.00 mA (-25% to 300%)
•    Simulate 2-Wire Transmitters 0.00-24.00mA
•    Power and read 2-Wire transmitters 0.00-24.00 mA
•    Better than ±0.025% of reading accuracy (± 1/2 lsd)
•    Large, high contrast graphic display (.413” digits)
•    EZ-Dial Knob - Easily adjust output by 0.01 mA
•    EZ-Check Switch will instantly output 4.00 mA, 20.00 mA or dial knob user set output
•    Slide switches allow for easy to use operation

 

 

More Information
Weight 1.200000
size 59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
Power Supply (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical
Manufacturer Fluke
MPN Fluke 771 / PIE 334 Value Kit
Manufacturer Warranty Three years for electronics one year for cable and clamp assembly
Mitchell Catalog Number 7C771JF,8C771JF,9C771JF
upc code 095969349697
You're reviewing: Fluke 771 Process Clamp Meter with PIE-334 VALUE KIT
Your Rating