Fluke Ti450 Pro Thermal Imaging Camera with increased thermal sensitivity

$0.00
Mitchell Part Number
JF-4947292
Manufacturer
Availability
Out of Stock
Quick overview
DISCONTINUED

Fluke Ti450 Pro Thermal Imaging Camera with increased thermal sensitivity

  • Native 320x240 Pixel Resolution (or 640 x 480 with SuperResolution)
  • Measure temperatures from -4° to 2,192°F
  • Precision Thermal Sensitivity (≤0.025 °C - 25mk)
  • Ultra smooth refresh rate (60 Hz)
  • Integrate laser distance measurement
  • IR Fusion autoblend or picture in picture
  • Built-In 5MP digital camera captures visible light images
  • IP54 rating for dust and water spray
  • Check motors, electrical panels, gear boxes, switchgear, high
    voltage lines, etc..

MultiSharp™ Focus creates images focused throughout the camera's field of view Focus is one of the most important aspects of thermography, and an out of focus image can give you data that can lead to misdiagnosis, costing you thousands. With the Fluke Ti450, worrying about focus is now obsolete. With MultiSharp™ focus, you get images auto-matically focused throughout the field of view, even if you start from a completely blurry target. That's because the camera takes multiple images and combines them to give a clear, accurate focus on targets near and far.

Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus. Simply point and shoot, the camera will automatically processes a stack of images focused near and far creating one crisp in-focus image

Get an instant infocus image of your designated target. LaserSharp® Auto Focus, exclusive to Fluke, uses a built-in laser distance meter that calculates and displays the distance from your designated target with pinpoint accuracy

Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 640 x 480 image

Save time – wirelessly sync images directly from your camera to the Fluke Connect® system and attach to an asset record or work order

More Information
Weight 8.000000
Product Includes AC charger/power supply, lithium ion smart battery, Soft transport bag, Statement of factory calibration, Quick start guide, Safety sheet
Specifications
IFOV with standard lens (spatial resolution) 1.31 mRad, D:S 753:1
Detector resolution 320 x 240 (76,800 pixels) — or 640 x 480 with SuperResolution
SuperResolution Yes, on camera and in software. Captures and combines 4x the data to create a 640 x 480 image
MultiSharp™ Focus  Yes, focused near and far, throughout the field of view
LaserSharp® Auto Focus  Yes, for consistently in-focus images. Every. Single. Time.
Laser distance meter  Yes, calculates distance to the target for precisely focused images and displays distance on screen
Advanced manual focus  Yes
Ruggedized touchscreen display  3.5 inch (landscape) 640 x 480 LCD
Rugged, ergonomic design for one-handed use  Yes
Digital zoom  2x and 4x 

Temperature measurement range
(not calibrated below -10 °C) 
-20 °C to +1200 °C (-4 °F to +2192 °F)
Accuracy  ±2 °C or 2% (at 25 °C nominal, whichever is greater)
Thermal sensitivity (NETD) ≤0.025 °C at 30 °C target temp (25 mK)
Filter mode (NETD improvement) ≤0.03 °C at 30 °C target temp (30 mK)
On-screen emissivity correction  Yes (both value and table)
On-screen reflected background temperature compensation  Yes
On-screen transmission correction  Yes
Standard palettes  8: Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted
Ultra Contrast™ palettes  8: Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra, Grayscale Ultra, Grayscale Inverted Ultra
General specifications
Frame rate  60 Hz or 9 Hz versions
Laser pointer  Yes
LED light (torch)  Yes
Color alarms (temperature alarms)  High temperature, low temperature, and isotherms (within range)
Center-point temperature measurement Yes
Spot temperature  Hot and cold spot markers
User-definable spot markers  3 user-definable spot markers
Center box  Expandable-contractible measurement box with MIN-MAX-AVG temp display
Infrared spectral band  7.5 μm to 14 μm (long wave)
Operating temperature  -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature  -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity  10% to 95% non-condensing
Safety  IEC 61010-1: Overvoltage category II, Pollution Degree 2
Electromagnetic compatibility  IEC 61326-1: Basic EM environment. CISPR 11: Group 1, Class A
Australian RCM  IEC 61326-1
US FCC  CFR 47, Part 15 Subpart B
Vibration  0.03 g2/Hz (3.8 g), 2.5 g IEC 68-2-6
Shock  25 g, IEC 68-2-29
Drop  Engineered to withstand 2 meter (6.5 feet) drop with standard lens
Size (H x W x L)   27.7 x 12.2 x 16.7 cm (10.9 x 4.8 x 6.5 in)
Weight (battery included) 1.04 kg (2.3 lb)
Enclosure rating IEC 60529: IP54 (protected against dust, limited ingress; protection against water spray from all directions)
Warranty Two-years (standard), extended warranties are available
Recommended calibration cycle Two-years (assumes normal operation and normal aging)
Supported languages Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish
size 10.5 in x 4.0 in x 5.7 in
Power Supply AC adapter/charger (110 V ac to 220 V ac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included.
Manufacturer Fluke
MPN TI450 Pro
Manufacturer Warranty Two-years
upc code 095969862660
You're reviewing: Fluke Ti450 Pro Thermal Imaging Camera with increased thermal sensitivity
Your Rating