Amprobe AT-4001CON Advanced Wire Tracer

$0.00
Mitchell Part Number
AMP-2734238
Manufacturer
Availability
Out of Stock
Quick overview

The Amprobe AT4001CON Advanced Wire Tracer is the base unit of the new and improved circuit tracer family, AT-4000CON. This new series features one universal transmitter, the R-4000 CON, which automatically switches to work with either energized or unenergized systems. The AT-4001CON comes complete with transmitter, receiver, and a soft carrying case.

Discontinued
More Information
Weight 2.250000
Product Includes tracer and case
Specifications

System Specifications

Transmitter Operating Voltage: 9-600 VAC
Operating Frequency: 32.786 kHz
Receiver Range Short Mode (in air): 20’ in air from the traced wire under test conditions
Receiver Range Open Mode (in air): 12’ in air from the traced wire under test conditions
Operating Temperature: -18°C to 49°C (0 to 120°F)
Storage temperature: -40° to 66°C (-40° to 150°F)
Case Material: ABS
Case Size: 14x6.7mm) 0.55” x 0.26”)
Weight (AT-4005 CON): 8.20 lbs.
R-4000 CON Receiver
Detectors: Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up
for open mode.
Sensitivity: Low, Mid, High gain with precise sensitivity adjustment (thumbwheel).
Short Mode performance: Over 20’ in air from the traced wire under test conditions.
Open Mode performance: Over 12’ from the traced wire in air under test conditions.
50HZ, 60HZ, and 400HZ Rejection: 120db
Power Source: 9V alkaline battery
Display: 10 LEDs
Case: Flame retardant ABS
Weight: 0.5 Lb. (113g)
T-4000 Transmitter
Operating voltage: 9-600 volts
Operating frequency: 32.768 KHZ
Duty Cycle: Transmit 2 pulses with a duration of 0.0625S each, every 0.5 seconds
Case: Flame retardant ABS
Display: LCD (Liquid Crystal Display)
Weight: 0.32 LB (143.5g)
Current Output of the Signal: Low Mode: 11 mA average, 30 mA peak
Medium Mode: 12 mA average, 36 mA peak
High Mode: 13 mA average, 63 mA peak
Fuse: Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM
Signal Output (9V supply): High setting: 0.74 VAC
Medium setting: 0.61 VAC
Low setting: 0.53 VAC
Battery: 9V alkaline- 24V jack will accept battery pack accessory (B2024 or B2025)
A2202 Clamp-on Transmitter Accessory
Operating Frequency: 32.768KHZ as supplied by T-4000
Case Breakdown Voltage: 3000 volts
Maximum Wire size: 2000 MCM or 2” dia. Cable
Battery: None, power is supplied by T-4000 B2024 Battery Pack
T-4000 B2024 Battery Pack
Type: Nickel-Cadmium rechargeable (20 AA cells)
Capacity: 24-Volt, 600 mah
Rechargeable Time: 14 hours
Fuse: internal self-resetting
B2025 Recharger/Converter
Input: 115VAC
Output: 24 VDC @350 mah

size 0.55” x 0.26” (14x6.7mm)
Power Supply Two 9V Batteries
Manufacturer Amprobe
MPN AT-4001CON
Manufacturer Warranty 1 Year
upc code 95969369213
You're reviewing: Amprobe AT-4001CON Advanced Wire Tracer
Your Rating