Amprobe AT-7020 Advanced Wire Tracer Kit
- Traces wires in walls, ceilings,floors and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 3.5” TFT LCDcolor display
- Three power modes––”High” power mode for normal circuits––”Low” power mode for precision tracing in difficult areas––”Clamp” power mode provides a boosted signal using signal clamp
- Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
Weight | 10.000000 |
---|---|
Product Includes | At-7000R receiver, AT-7000-T transmitter, TL-7000 test leads, CC-7000 carrying case |
Specifications | Specifications AT-7000-R Receiver AT-7000-T Transmitter SC-7000 Signal ClampTFT LCD Color Display size 3.5 in (8.89 cm) 1.77 in (4.5 cm) –TFT LCD Color Display Dimensions 2.76 x 2.07 in (7.01 x 5.26 cm) 1.1 x 1.38 in (2.79 x 3.51 cm) –TFT LCD Color Display Resolution 320px x 240px 128px x 160px –TFT LCD Color Display type TFT LCD RGB x TFT –TFT LCD Color Display • • –Backlight • • –mDDR 64 MB 64 MB –FLASH memory 128 MB 128 MB –Audio 95 dB – –Operating Temperature range 0 to 120˚F (-17.77 ˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C)Storage Temperature -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C)Operating Humidity 95% R.H max 95% R.H max 95% R.H maxOperating altitude 2000 m 2000 m 2000 mMeasurement Category CAT IV 600 V CAT IV 600 V CAT IV 600 VTransient protection – 8.00 kV (1.2/50 uS surge) –Pollution degree 2 2 2Drop test 3.28 ft (1 m) 3.28 ft (1 m) 3.28 ft (1 m)Power Supply 4xAA Alkaline battery90-270 V AC/DC, 40-400 HzAT-7030: BR-7000-T: LI-ION, 7.2 V, 2.2 AhAT-7020: 6x AA Alkaline Battery–Power consumption 4xAA battery: 2WAT-7030: BR-7000-T battery: 2WAT-7020: 6xAA battery:2WAC line voltage (Charging state): 10WAC line voltage: 3W–Charging voltage (BR-7000-T) – 85-270 V –Charging duration (BR-7000-T) – 16 h –Power up time 30 s 20 s –Non-Rechargeable Battery lifetime 9 h 9 h –Rechargeable Battery lifetime(BR-7000-T) – 10 h –Leakage current (non-rechargeable) 1.1 to 2.6 uA 6 to 14 uA –Leakage current (rechargeable) – 1.2 to 4 uA –IP Rating IP52 IP40 –Sampling rate6.25 kHz Signal: 62.5 kSPS32.768 kHz: 256 kSPSNCV: 62.5 kSPS62.5 kSPS –Signal Response Audible beep, bargraph display,numeric displayNumeric display –Response timeSmart mode: 750 msTip Sensor Energized: 300 msTip Sensor De-Energized: 750 msNCV: 500 ms, Battery monitoring: 5 sVoltage measurement: 1.5 sBattery monitoring: 5 sInstantaneousVoltage Measurement – 9-600 V, DC to 400 Hz –Non-Contact Voltage (NCV) 90-600 V AC – –LED Indicator Green Flashing: Signal DetectionRed: EnergizedOFF: De-EnergizedOrange: Over voltage–Operating Frequency Energized: 6.25 kHzDe-Energized: 32.768 kHzVoltage measurement: 40-400 HzEnergized: 6.25 kHzDe-Energized: 32.768 kHzEnergized: 6.25 kHzDe-Energized: 32.768 kHzAcoustic Indication 1 kHz Piezo Buzzer – –Range Detection (Open air) – – –Smart mode Pinpointing: Around 1.97 in (5 cm) radiusDirection indication: Up to 5 ft (152.4 cm)– –TIP Sensor: Energized Pinpointing: Around 1.97 in (5 cm)Detection: Up to 22 ft (670.56 cm)– –TIP Sensor: De-Energized Pinpointing: Around 1.97 in (5 cm) radiusDetection: Up to 14 ft (426.72 cm)– –NCV Detection: Up to 4 ft (121.92 cm) – –Current Output (Low) Energized – 53 mA rms –Current Output (High) Energized – 92 mA rms –Current output (Low)with BR-7000-T Energized– 53 mA rms –Current output (High)with BR-7000-T Energized– 120 mA rms –Voltage output (Low) De-Energized – 60 Vp-p –Voltage output (High) De-Energized – 120 Vp-p –Voltage output (Clamp) De-Energized – 180 Vp-p –Jaw Opening – – 2 in (5.08 cm)Fuse – 3.15A, 600V MAX, SLOW 5X20MM –Dimensions 10.92 x 4.43 x 2.55 in(27.75 x 11.25 x 6.483 cm)8.5 x 4 x 2.2 in(21.59 x 10.16 x 5.59 cm)8.2 x 3.2 x 1.68 in(20.83 x 8.13 x 4.27 cm)Weight 1.20 lb (0.544 kg) 1.30 lbs (0.593 kg) 0.648 lb (0.294 kg) |
size | 16 x 13 x 7 in |
Power Supply | Ten 'AA' Batteries |
Manufacturer | Amprobe |
MPN | AT-7020 |
Manufacturer Warranty | 1 Year |
upc code | 095969664745 |