PIE 422Plus Universal Thermocouple Calibrator with full function milliamp calibration

PIE 422Plus Universal Thermocouple Calibrator with full function milliamp calibration

The only 2-in-1 thermocouple & full function milliamp calibrator on the market - the only calibrator that combines ALL the functions of a diagnostic milliamp calibrator with the accuracy of a laboratory thermocouple calibrator.

Protect instruments & technicians from potentially dangerous catastrophic failures due to hidden loop problems - Quickly diagnose ground fault and current leakage often caused by water in conduits and junction boxes with patented loop diagnostic technology (US Patent# 7,248,058).

Best accuracy & stability found in a handheld calibrator - The internal cold junction is accurate to ±0.05°C and is traceable to NIST. Isothermal brass blocks with screw terminals allow for connection of bare thermocouple wires plus a miniature thermocouple connector for fast connections. More accurate than any other handheld thermocouple calibrator.

Verify Heat Treating Uniformity Survey Recorders & perform System Accuracy Tests - The PIE 422Plus is capable of meeting the requirements of an AMS 2750 Field Test Instrument when certified by an accredited laboratory.

Half the size of the closest competitor & easiest to use - Fits the palm of your hand like a cell phone and weighs less than a pound. Automatic indication of connections on the display for simple hookups. Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in dark areas of the plant with the backlit display.

• Source and Read 4 or 14 T/C Types plus mV (two models to choose from)
• J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel); -13.000 to 80.000 mV
• Calibrate with Confidence
• Resolution of 0.1° F & C; Accurate to 0.2°
• Faster Calibrations
• Instantly select three outputs with EZ-CHECK switch
• Easily find trip points with two speed EZ-DIAL &
• Automatic Stepping
• Easily Change Thermocouple Types & Scale
• Double click knob to select T/C type and ° F & C
• Easy-to-Read Display
• Turn on the backlight to read in dark areas of the plant
• Use in the Plant, Field or Shop

Includes Rubber Boot and Attached Test Leads
Low profile switches resist accidental damage
• Simple Battery Changes Separate compartment for no-tool battery changes
Four inexpensive “AA” batteries
• Verify Cold Junction Temperature & Output
Secondary display of compensatedEasily find trip points with two speed EZ-DIAL knob &
Automatic Stepping
• Easily Change RTD Types & Scale
Double click knob to select T/C type and ° F & C
• Easy-to-Read Display
Turn on the backlight to read in dark areas of the plant
• Simple Battery Changes
Separate compartment for no-tool battery changes
Four inexpensive “AA” batteries
• Use in the Plant, Field or Shop
Includes Rubber Boot and RTD Wire Kit (020-0208)
Low profile switches resist accidental damage