PIE 334 Plus Process Loop Calibrator 4-20mA with loop leakage current detection

Special Price $1,217.30 Regular Price $1,295.00
Mitchell Part Number
PIE-334PLUS
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

The PIE Cal 334Plus process loop calibrator can source or simulate 4-20mA signals AND features loop leakage current

Practical Instruments PIE334 Plus Loop Calibrator with loop leakage current detection

  • Loop diagnostics mode measures loop leakage current, total loop resistance and AC voltage present in real time while the loop is in operation
  • Much more responsive display makes for easier and faster adjustments
  • Protective rubber boot for toolbox toughness
  • 1000% improvement in battery life allows up to 125 hours of nominal use per battery change
  • Source 0.00 to 24.00 mA (-25% to 125%)
  • Read 0.00 to 52.00 mA (-25% to 300%)
  • Simulate 2-Wire Transmitters 0.00-24.00mA
  • Power and read 2-Wire transmitters 0.00-24.00 mA
  • Better than ±0.025% of reading accuracy (± 1/2 lsd)
  • Large, high contrast graphic display (.413” digits)
  • EZ-Dial Knob - Easily adjust output by 0.01 mA
  • EZ-Check Switch will instantly output 4.00 mA, 20.00 mA or dial knob user set output
  • Slide switches allow for easy to use operation
More Information
Weight 2.000000
Product Includes Process Loop Calibrator, test leads w/ clips, four “AA” batteries, protective boot & NIST certification
Specifications

Output: 0.00 to 24.00 mA Full Span or -25.0 to 125.0% of 4-20mA
Accuracy: ±0.025% of Span @ 4 mA & 20 mA  (± 0.005mA)
Loop Drive Capability: 1200 ohms at 20 mA for 15 hours

size 5.63" x 3" x 1.6” (12.1 oz)
Power Supply four "AA" Batteries
Manufacturer PIE
MPN 334PLUS
Manufacturer Warranty 1 year
Mitchell Catalog Number 7CPIE334P, 8CPIE334P, 9CMIT334AP, WBPIE334P
You're reviewing: PIE 334 Plus Process Loop Calibrator 4-20mA with loop leakage current detection
Your Rating