All-Test Pro 31 Motor Tester and Winding Troubleshooting Tool

$0.00
Mitchell Part Number
BJM-50001
Manufacturer
Availability
Out of Stock
Quick overview

Discontinued

All-Test Pro 31 Motor Tester and Winding Troubleshooting Tool

Applications:
•  Test new and rewound motors before installing to ensure they’re good
•  Test motors during shut-down to detect  developing faults
•  Positively troubleshoot motor & drive trips to identify the problem area; motor, drive, overload, cabling, etc.  
•  When testing installed motors, most tests can be run from the MCC (motor control cabinet) through even hundreds of feet of cable

Test installed motors on-site from the MCC… Or test new, used, repaired & spare motors in the shop or parts room

Works on all sizes of motors... fractional HP ratings to motors with up to thousands of HP

Your motor drive has just shut the system down!  Is the problem in the motor, the drive, the connections, or the overload?  Maybe you’ve installed a large new motor only to find it won’t run—how could you have detected the fault in advance? 
This off-line tester applies a low voltage AC signal to windings, measures relative impedance & phase angle, and performs a current/frequency response test.  Compare balance of measurements (just like comparing resistance) and you know the condition of the motor.  Also measures insulation resistance up to 500MΩ with choice of 500V or 1000V test voltages to detect grounded windings & failing insulation.

More Information
Weight 5.000000
Product Includes tester, soft case, 120V recharger, protective glove and test leads with clips
Specifications

Detects all of these common
motor problems:
- Grounded Windings (measures insulation resistance up to 500 MΩ)
- Capacitor Failures (pass/fail test)
- Shorted Armature Windings in DC Motors
- Turn-to-turn Faults
- Coil-to-coil Faults
- Phase-to-phase Faults
- Open Phases
- Phase Unbalances
- Broken Rotor Bars

Power Supply rechargable battery pack
Manufacturer ALL-TEST Pro, LLC
MPN 50001
Manufacturer Warranty 1 Year
Mitchell Catalog Number 7ZMIT258, 8ZMIT258, 9ZMIT258, WBMIT258, BJM-AT31
You're reviewing: All-Test Pro 31 Motor Tester and Winding Troubleshooting Tool
Your Rating