Mitchell MIT763 Motor Rotation and Phase Sequence Indicator Value Kit

$199.95
Mitchell Part Number
MMJ-MIT763K
Availability
Typically in stock, Call if Urgent
Quick overview

Use the Mitchell MIT763 Motor Rotation and Phase Sequence Indicator to test three-phase power sequence and align 3-phase motor rotation. Test incoming supply side to determine phase rotation or confirm the motor rotation on an unpowered load side of motor for clockwise or counter-clockwise rotation.

Mitchell MIT763 Motor Rotation and Phase Sequence Indicator Value Kit

Value kit includes Tester plus premium hard carrying case

• Test 3-phase power sequence and 3-phase motor rotation
• Entirely solid state for reliability
• On / Off switch to ensure maximum safety during operation
• Visual LED indicators for rotation and phase sequence
• 100 to 600 VAC @ 10 to 400 Hz

When installing a motor, determining the rotation direction is critical to the operation of the motor. A phase rotation meter compares the phase rotation of two different 3-phase connections. Three leads, labeled "A," "B," and "C," are connected to the test unit's side with the two red and one green indicator lights. Three other leads are labeled the same but are connected to the opposite side of the test unit, which has three yellow indicator lights ‘L1, L2, L3’. The meter will indicate whether the motor hookup should be with a clockwise or counterclockwise power line connection. Correct motor installation is dependent on this proper phase hook-up.

More Information
Weight 3.000000
Product Includes Includes meter, three colored test leads with alligator clips and Hard Carrying Case
Specifications
Phase Presence From : 100 Vac
Nominal Voltage for Phase To : 600 Vac
Presence Indication (The voltage required for the neon Lamps L1, L2, L3 to light up) Frequency : 10-400 Hz
Determination of Phase From : 1 Vac
Rotation Field Direction To : 450 Vac
  Frequency : 2-400 Hz
Determination of Motor Connections (requires > 1/2 turn of the shaft) From : 1 Vac
  To : 600 Vac
  Frequency : 2-400 Hz
Maximum Current Consumption 18mA
Over Voltage CLASS III 600V
Over Load between all terminals 600V
Battery Ok goes off when battery voltage < 6.5 Vdc
Power Source 9V (6F22.006P) x 1 battery
Dimensions 153(L) x 72(W) x 35(D) mm
Weight Approx. 185g (battery included)
Accessories Test leads (AL-34)
  Vinly case
  Instruction manual
  Battery
Power Supply 9V Battery
Manufacturer Mitchell Instrument
MPN MIT763K
Manufacturer Warranty 1 Year
Mitchell Catalog Number 9ert608lu, 8ert608lu, 7ert608lu, 6ert608a, 4ert608a, rt608a, 3ert608a, mmj-mit763k
You're reviewing: Mitchell MIT763 Motor Rotation and Phase Sequence Indicator Value Kit
Your Rating