SKF TMMK 10-35 Bearing Installation Combo Tool Kit

Special Price $2,324.24 Regular Price $2,603.16
Mitchell Part Number
SKF-TMMK10-35
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

The Combi Kit TMMK 10-30 is designed for quick, precise and safe mounting of bearings with bore 10 to 30 mm (0.39 - 1.18 in). It can also be used to mount bushings, seal rings, belt pulleys etc. The puller can either be used for dismounting deep groove ball bearings with an interference fit on both rings or on outer-ring only without having a shaft

Description

For dismounting, the kit comprises two centre screws, five sets of three puller arms each made of high-tensile alloy steel, a puller handle, a slide hammer and seven support rings to support the bearing with an interference fit on the outer-ring only. The arms are provided with color codes for an easy identification. For mounting, the kit consists of  21 impact rings, two high-strength aluminium sleeves and a dead-blow hammer with nylon faces. The rings as wll as the impact surfaces are made of a super-tough acetal resin, giving high mechanical strength and impact fatigue resistance at a very low weight.  The fibreglass handle, with comfortable grip for good handling, absorbs shock and vibration. All parts are clearly arranged in a practical transport case.  A selection chart and instructing pictures are included in each unit.

 

Operating Instructions

Dismounting ball bearings on a shaft and in a housing

1. Select arms and spindle with the aid of the selection chart.

2. Make sure arms are spread over the bearing as per chart below.

3. Attach the arms to the spindle nut. For easy assembly the spindle nut is provided with an elastic locking ring that keeps the arms in correct position during installation.

4. The bearing can now easily be dismounted with a spanner.

5. The largest arm set is provided with locking plates which rest against the inner-ring of the bearing preventing the tip from slipping out of the raceway.

Dismounting ball bearings in a housing without shaft

6. Follow instructions 1., 2., 3. and 5.

7. Select the right support ring to close bearing bore providing a support to the spindle.

8. Screw in the slide hammer and generate the necessary impact to dismount the bearing.

Mounting bearings, bushings, seal rings, belt pulleys etc.

9. Select the right impact ring and -sleeve and generate necessary impact force by using the dead-blow hammer.

 

 

Click Here for SKF's TKSA20 Laser Shaft Alignment System - Only $2895.00 Best Value For Small to Medium size couplings

More Information
Weight 15.000000
Specifications
 Technical data
 Designation : TMBH 1
 Power:
 Voltage : 100 - 240 V, 50 - 60 Hz
 Power (maximum) : 350 Watt
 Cosine : > 0,95
 Component size range
 - inner diameter : 20 ... 100 mm (0.8 ... 4 in)
 - width : < 50 mm (2 in)
 - weight : up to approximately 5 kg (11 lb)
 Control functions:
 Time control : 0 - 60 minutes
 Temperature control : 0 - 200° C (32 - 392° F)
 Accuracy temperature control : 3° C (6° F)
 Maximum temperature : 200° C (392° F)
 Dimensions:
 Control box : 150 x 330 x 105 mm (6 x 13 x 4 in)
 Heating clamp : 114 x 114 mm (4.5 x 4.5 in)
 Operating space heating clamp : 52 x 52 mm (2.0 x 2.0 in)
 Complete unit in carrying case : 370 x 240 x 130 mm (15 x 9 x 5 in)
 Length clamp cable : 75 cm (30 in)
 Length power cable : 2 m (80 in)
 Length temperature probe cable : 100 cm (40 in)
 Weight complete unit : 4,5 kg (10 lb)
 
Manufacturer SKF
MPN TMMK 10-35
Manufacturer Warranty 1 year
You're reviewing: SKF TMMK 10-35 Bearing Installation Combo Tool Kit
Your Rating