TPI 9070 Smart Vibration Meter with ISO based alarms

Special Price $545.50 Regular Price $595.00
Mitchell Part Number
TPI-9070
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

TPI 9070 Smart Vibration Meter with ISO based alarms - Analyze and Interprets readings giving an overall machine and bearing conditions

TPI 9070 Smart Vibration Meter with ISO based alarms

a simple, easy to use, low cost vibration meter that records, analyze and displays vibration signals at the push of a button.

Overall machine and bearing conditions:
vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).

Easy vibration analysis:
clear picture of machine problems detected with built in band filters:
1X (unbalance)
2X (misalignment)
3X (looseness)

Identify complex issues:
800-line spectrum with zoom and cursor.

Readings are easily saved and recalled with all alarm levels and settings stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use Setup Wizard.

More Information
Weight 3.000000
Product Includes TPI 9070 Smart Vibration Meter with ISO based alarms
Specifications

 Vibration Frequency ranges: 0.2 Hz to 1kHz ISO &  2Hz - 3kHz
 Frequency resolution: 100 / 200 / 400 / 800 lines
 Displayed amplitude units: Acceleration in g / velocity in inches per second or mm per second /  Bearing damage in BDU
 Displayed frequency units: Hz, CPM or RPM
 Input range:  +/- 50 g
 Dynamic range: 72 dB
 Auto set up of VA bands: Yes
 Accelerometer connection: Internal sensor
 Environmental: Water: IP67 Waterproof
 Operating: 32°F to 122°F (0C to 50C)
 Storage: -4°F to 158°F (-20C to 70C)
 Battery life: Approximately 50 hours of normal use

size 7.95" tall by 2.36" wide (9.8 oz)
Manufacturer TPI
MPN 9070
You're reviewing: TPI 9070 Smart Vibration Meter with ISO based alarms
Your Rating