FLIR CM174 Thermal Imaging Clamp Meter - 600 Amp AC/DC TRMS
Discontinued
Flir CM174 Thermal Imaging Clamp Meter
The FLIR CM174 Imaging 600A AC/DC Clamp Meter is the only clamp meter with the power to lead you to problems you can’t see with a standard clamp meter. Featuring Infrared Guided Measurement (IGM) technology powered by an integrated FLIR Lepton® thermal imaging sensor, CM174 visually guides you to the precise location of a potential electrical problem, identifying dangerous and unknown problem areas safely.
A convenient, all-in-one tool, so you can always have thermal imaging at your fingertips. Visually identify electrical issues without requiring direct contact with panels, cabinets, or cluttered wires and cables that may present safety hazards. No matter what obstacles are in your way, IGM can quickly guide you to the problem.
Confirm your findings Verify problems, check load, and validate hot spots. Get accurate amperage and voltage measurements and center-point temperature readings. A built-in laser and crosshair help you pinpoint the location of the problem.
Solve complex electrical issues The CM174’s intelligent design features a narrow jaw and built-in worklights to help you access difficult locations with lighting issues. Advanced electrical features allow you to get all the readings you need to solve problems fast, including True RMS, LoZ, VFD Mode, Inrush, and Smart Diode with Disable. Plus, the CM174 is expandable to 3000 Amps AC with FLIR FLEX accessories.
| Weight | 1.000000 |
|---|---|
| Product Includes | Clamp Meter, 4 x AAA Batteries, Premium Silicone Test Leads, Quick Start, User Manual (CD), Extended Warranty Registration Card |
| Specifications | Thermal Imaging Measurements Imaging Detector FLIR Lepton® microbolometer Thermal Image Resolution 4800 pixels (60 × 80) Field of View (V x H) 38.6° x 50.0° Color Palettes Iron, Rainbow, Grayscale Image Frame Rate 9Hz Temperature Measurement Center point of thermal image Temperature Range -13°F to 302°F (-25°C to 150°C) Temperature Distance to Spot Ratio 30:1 Temperature Accuracy ±5.4°F (3°C) or ±3% of rdg Spectral Response 8 to 14μm Temperature Targeting Class 1 Laser Pointer and Crosshair on display Emissivity Settings 4 Presets with Custom Adjustment Electrical Measurements AC/DC Voltage 1000V ±1.0% VFD AC Voltage 1000V ±1.0% LoZ Mode AC Voltage 1000V ±1.0% LoZ Mode DC Voltage 1000V ±1.0% DC Current 600.0A ±2.0% AC Current 600.0A ±2.0% VFD AC Current 600.0A ±2.0% Inrush AC Current 600.0A ±3.0% Inrush AC Current Threshold Min 0.5A Integration Time 100ms Frequency 60.00kHz ±0.1% Resistance 6000Ω ±1.0% Continuity 600.0Ω ±1.0% Capacitance 1000μF ±1.0% Diode 1.5V ±1.5% General information Display 6000 Count 2.0” (50mm)Color TFT Jaw Opening 1.38" (35mm), 1250MCM Category Rating CAT IV-600V, CAT III-1000V Certifications UL Battery Type 4 x AAA Warranty 10 Years on Product and Detector* |
| Power Supply | Four "AAA" batteries |
| Manufacturer | FLIR Systems |
| MPN | CM174 |
| Manufacturer Warranty | 10 years |
| upc code | 793950371749 |