Mitchell Instruments forTest and Measurement, Safety, NFPA 70E Arc Flash

Skip to Main Content »

Search Site
For the Very Best Price, Call us at: (888) 270 2690

M3902 Ultrasonic Flow Meter

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

M3902 Ultrasonic Flow Meter

See other Dynasonics products

Mitchell Part Number: DYJ-M3902LC

Availability: Typically In stock - Call if Urgent!

Regular Price: $5,960.00

Special Price: $5,899.00

Add Items to Cart Add to Cart

Quick Overview

Enhanced Doppler Ultrasonic Flow Meter - Will Work on any Solid Pipe or Tube 1/4” Diameter or Greater

Be the first to review this product

The M3902 Ultrasonic Flow Meter Features:



  • Employs doppler technology; the flowmeter uses piezo-electric transducers to transmit and receive an acoustic signal reflected off discontinuities in a liquid flow stream


 



  • This technology provides the following benefits:



  1. No cost installation- just strap transducer around outside of pipe

  2. Systems do not need to be shut down for periodic or portable measurement

  3. Chiller systems may be balanced in a fraction of the time

  4. Can be used on a range of liquids from waste streams to clean water systems

  5. Microprocessor allows simple calibrated set-up for pipe diameter so that the meter will readout in volumetric total, ie GPM


The doppler ultrasonic flowmeter utilizes a clamp-on, piezoelectric, trans-ducer to transmit ultrasound through a pipe wall and into a flowing liquid.  The ultrasonic signal is reflected from suspended solids or entrained gases drawn out of solution.  (Entrained gases are drawn out of solution by a hydraulic disturbance such as 90° elbow.)  A second transducer receives the reflected sound and the meter’s circuitry compares the transmitted and received frequencies.  If the liquid is moving, a frequency shift occurs which is proportional to fluid velocity.  The signal processor converts this frequency shift to fluid velocity and allows the rate to be displayed in a variety of user selectable units.

Specifications

Meter Specifications:

Velocity:  0.5 - 20 FPS (0.15 - 6.08 MPS)
Outputs:  4 - 20 mA, 600 Ohms max isolated
Indicators:  Power, signal strength, flow analyzer, fault, over-range, read, low battery, charge
Display:  2 line x 20 character alphanumeric LCD
              (backlit).  Digit height 0.2” (5 mm), six-digit rate,
              eight-digit totalizer (resettable)
Units:  User configured
Rate US Metric:  FPS, GPM, MGD (MPS, LPM, M3/hr)
Totalizer US Metric:  Gallons (liters, M3)
Ambient Conditions:  -22 to 160F (-30 to 70°C)
    0 - 95% relative humidity, non condensing
Enclosure:  NEMA 4X, (IP-65) ABS with SS hardware. 11W x 17L x 8D”
Non-linearity (Accuracy):  ±2% full scale
Sensitivity:  0.4% of full scale
Repeatability:  ±0.4% of full scale
Response Time:  5 - 50 seconds, user configured, to 90% of value, step change in flow
Power Requirements:  Internal lead acid gel cell battery provides 8 hours of continuous operation.  AC charging:  (Std) 110/220 VAC 50/60 Hz ±5%

Transducer Specifications

Liquid Requirements:  25 ppm of 30 micron size* suspended solids or entrained gases (air). *Less than this minimum will require transducer mount downstream of a 90° elbow
Transducer to Transmitter Distance:  (Std) 20 feet (6.08 meters), retractable cord
Pipe Sizes:  (Std) 1 - 120” (25 - 1524 mm) Pipe ID (Opt) 0.25 - 1” (6 - 25 mm), Small Pipe Transducer
Housing Material: (Std) Aluminum with epoxy encapsulation (High Temp) Torlon™ with SS

 

Shipping Weight 25.0000
Power Supply Internal rechargeable lead acid gel cell battery
Manufacturer Dynasonics
MPN D904-A1NA-NN
Mitchell Catalog Number 7LM3902LC,8LM3902LC,9LM3902LC,WBM3902LC, KNOWURFLO

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.



Thank You For Shopping with Mitchell Instrument Company Inc.® - 1570 Cherokee St. San Marcos CA 92078 - Phone: (760) 744 2690 - Fax (760) 744 0083