Mitchell MIT6501 Advanced 5KV Insulation Resistance Tester - Rechargeable Datalogging Megohmmeter

Special Price $1,499.95 Regular Price $1,899.95
Mitchell Part Number
MMJ-MIT6501
Availability
Typically in stock, Call if Urgent
Quick overview
Mitchell MIT6501 5KV Insulation Resistance Tester with OLED Display and Rechargeable Batteries - Rugged Integrated Case - 500/1000/2500/5000 Volt DC output with logging

Mitchell MIT6501 5KV Insulation Resistance Tester Datalogging Megohmmeter

The MIT6501 is a quality low cost solution for 5kV insulation resistance testing, built into a rugged hard case it can handle the rugged outdoor environments with ease.  Featuring everything you would expect, the MIT6501 also has internal storage of up to 200 measurements and software to create, save and print reports.

  • High Visibility, High Contrast Next Generation Organic LED (OLED) Display
  • Long Lasting Rechargeable Lithium Ion Battery Pack
  • Test insulation resistance up to 10TΩ
  • Four Insulation Test Voltage Output Ranges: 500V, 1000V, 2500V, 5000V DC
  • DAR and PI automatic calculations
  • Adjustable test duration: 1 to 30 minutes
  • Safety Voltmeter - if any voltage is detected (AC or DC) the tester will automatically switch to voltage detection mode
  • PC Connection - Optically isolated USB connection allows real time display on PC as well as saved measurement transfer
  • Manually store up to 200 individual tests to internal on-board memory
  • Overload protected
  • Audible and Visual warning of external voltage presence (above 30V)


DAR - The Dielectric Absorption Ratio is the ratio of the insulation resistance measured at 1 minute divided by the insulation resistance measured at 30 seconds. Thirty seconds after starting a test, the tester will beep, indicating that the resistance value measured at 30 seconds has been saved. One minute after starting a test, the tester will beep again, indicating that the DAR result has been computed. The display format then changes to display the DAR result.\

PI - The Polarization Index is the ratio of the insulation resistance measured at 10 minutes divided by the insulation resistance measured at 1 minute. One minute after starting a test, the resistance value is saved and the DAR is displayed. The test then continues, and after 10 minutes, the tester will beep again, indicating
that the PI result has been computed. The display format changes to display the PI result.

TΩ = Terra Ohm (1,000,000,000,000 ohms)

More Information
Weight 10.000000
Product Includes High Voltage test leads, alligator clips, usb cable, windows software, recharger, test report and user manual
Specifications

Ouput Test voltage Ranges: 500V, 1000V, 2500V, 5000V DC
500V Insulation Resistance Range: up to 1TΩ
100V Insulation Resistance Range: up to 2TΩ
2500V Insulation Resistance Range: up to 5TΩ
5000V Insulation Resistance Range: up to 10TΩ
Short circuit current: up to 5mA
Voltmeter:  ACV: 30~600V DCV: 30~600V Accuracy: ±(2.0%rdg + 3dgt) Resolution: 1V
Current measurement: 0.5nA ~ 0.55mA (Depending on the insulation resistance)
Safety standards: EN 61010-1 CAT IV 600V EN 61010-2-030 EN 61326-1

size 13" x 10.23" x 6.29" (8 lbs)
Power Supply rechargable battery pack
Manufacturer Mitchell Instrument
MPN MIT6501
Manufacturer Warranty 1 Year
Mitchell Catalog Number 9ZMIT6500, WBMIT6500, MMJ-MIT6500
You're reviewing: Mitchell MIT6501 Advanced 5KV Insulation Resistance Tester - Rechargeable Datalogging Megohmmeter
Your Rating