Hioki 3198-01/500PRO Power Quality Analyzer Kit - 500 Amp

$0.00
Mitchell Part Number
HKJ-3198-01/500PRO
Manufacturer
Availability
Out of Stock
Quick overview
Discontinued - Replaced by PQ3198

Hioki 3198-01/500PRO Power Quality Analyzer Kit - 500 Amp custom kit includes four 500 Clamp On Current Probes and professional software

  • Measure and Record the following parameters:
  • Spikes (Disturbances, Tran-sients, High speed events, etc...)
  • Voltage Quality (Surges, Sags, Brownouts, Black Outs)
  • Power Levels (Frequency, Voltage, Current active/ reac-tive/apparent power, power factor)
  • Phase Information (Voltage unbalance ratio, Current unbalance ratio)
  • Harmonic Information (Voltage, Current and Power Harmonics up to the 50th order, inter-harmonic voltage & current, Harmonic phase angle, THD, THD-F, THD-R, K factor)
  • Flicker (Measures Pst & Plt flicker to international standards)
  • High Frequency Transient  Detection and Waveform Display: Continually samples voltage inputs at a rate of 2 Million Samples per Second and can detect, record and display waveforms of high speed/high voltage transients 0.5 micro-seconds or longer(up to 2000 Vpk)
More Information
Weight 15.000000
Product Includes 3198 power analyzer, Four 500 Clamp On Current Probes, voltage leads with aligator clips, rechargable battery pack,AC adapter, USB connection cable, Professional PC software, and Carrying case
Specifications

Number of Voltage Inputs: Four (5 to 600 VAC)
Number of Current Inputs: Four (up to 5000 AAC depending on probes used)
Accuracy Voltage Measurements: ±0.2% of rdg. ±1% FS
Accuracy Current Measurements: ±0.2% rdg ±1% FS  (plus accuracy of Current Probe)
Typical Recording Times:
    - 5 hours @ one sample / second
    - 12 days @ one sample / minute
    - 31 @ one sample / 10 minutes
Maximum Events Recorded: 100  Events (unaffected by logged data)
Internal Memory: 13 Megabyte
Sampling Rate: 256 points per cycle
Measurement Method: True RMS
Input resistance:  Voltage: 4 Mohms
                 Clamp input: 200 kohms
Frequency Range: Fundamental 42.5 to 69Hz
Display: 6.4" TFT color LCD (640 x 480)

Operating temp and humidity ranges: 32°F to 104°F
Power Requirements: 120 Volt AC (60 Hz) or Rechargeable Hi-MH battery (30 minutes of use per charge)

size 11.73" x 8.46" x 2.64" (4.4 lbs)
Power Supply rechargable battery pack
Manufacturer Hioki
MPN 3198-01/500PRO
Manufacturer Warranty 1 Year
Mitchell Catalog Number WBMIT3196HP, 9PMIT3196HP, 8PMIT3196HP, 7PMIT3196HP
You're reviewing: Hioki 3198-01/500PRO Power Quality Analyzer Kit - 500 Amp
Your Rating