• Compare 0
Wishlist 0
Toggle Nav
Search
Advanced Search
Call Toll Free:
888-270-2690
My Cart 0
Menu
Account

Bierer GT600-2 Personal Grounding Assembly Tester 600A with Voltmeter

$4,589.00
Mitchell Part Number
BIR-GT600-2
Manufacturer
Bierer
Availability
Typically in stock, Call if Urgent
Be the first to review this product
Add to wishlist Add to compare
Quick overview
The GT600VMA provides quality testing for personal protective grounding assemblies. The GT Series Grounding Assembly Testers are designed to provide integrity testing of the electrical characteristics of portable protective grounding assemblies.
image

Bierer GT600VMA Personal Grounding Assembly Tester 600A with Voltmeter

The GT600VMA provide quality testing for personal protective grounding assemblies. The GT Series Grounding Assembly Testers are designed to provide integrity testing of the electrical characteristics of portable protective grounding assemblies. The GT Series Testers provide a reliable test by administering Rated ASTM Current through the grounding assembly and measuring the voltage drop across the assembly. The voltage drop in conjunction with a thorough visual inspection determines if the grounding assembly meets ASTM electrical specifications.

The GT Series Testers are housed in a sturdy carrying case. Each unit is compact, weighs approximately 60 pounds and quickly confirms the condition of an entire grounding jumper assembly. It is easy to operate and can be set up for testing in a matter of minutes by qualified lab or field personnel.

GT600VMA Features:

  • Powered by conventional 115VAC outlet rated at 20 amps or higher
  • Variable transformer allows ASTM continuous current to be applied to cable
  • Compact and easy to read reference chart
  • Optional voltmeter addition allows for troubleshooting clamp and ferrule connections
  • Easily converts for testing elbows, bushings, mechanical jumpers, substation clamps, truck grounds and cluster grounds
  • Optional adapters are available for special applications
More Information
Weight 60.000000
Product Includes Includes: 600 Amp Ground/Jumper Tester with Volt Meter, Ball Stud, Standard Stud, Tightening Pin, Manual
Specifications

How to Use the GT Series Grounding Assembly Tester:

  1. Make sure the current control knob is turned fully counterclockwise to zero.
  2. Install the test studs into the threaded terminals provided on thesides of the tester.
  3. Measure the grounding jumper to the nearest foot. For lengthsnot shown on the chart, round to the nearest foot. For a moreconservative test, always round down.
  4. Clamp the grounding jumper to the test studs, making sureclamps are properly tightened. See diagrams for preferred cableconfigurations.
  5. Turn the power switch to the “ON” position.
  6. While observing the digital ammeter, slowly turn the currentcontrol knob clockwise until the current in the test cable reachesits rated ASTM value (based on the cable dia.) provided on table.
  7. Grounding jumpers failing the test must be disassembled forinspection, cleaning, tightening, and/or terminal replacement. Ifthe grounding jumper fails the retest after maintenance isperformed, the grounding jumper should be retired.
Manufacturer Bierer
MPN GT600VMA
Manufacturer Warranty 1 Year Warranty Domestic USA; No Warranty for International Shipments
You're reviewing: Bierer GT600-2 Personal Grounding Assembly Tester 600A with Voltmeter
Your Rating