HD Electric DVI-100T/K01 Digital Voltage Indicator Kit Capacitive Test Point Mode (99kV)
The DVI emit an audible alarm when voltage above 100VAC is detected. They are very easy to use as there are no range selector switches or settings to be made just contact the conductor and read the display.
The DVI-100 is designed to be used on distribution systems in both overhead and underground applications and on transmission systems up to 161kV. The DVI-100 indicates voltage from 0.1kV – 99kV and is auto-ranging.Voltage is displayed on a large 2.25”LED display with a 2-digit readout. In addition, an audible alarm alerts the user to the presence of voltage above 100VAC. The DVI is auto shut-off and will turn off after 3-4 minutes of inactivity.
A 2”overhead hook probe (HP-DVI-2) is supplied with the DVI-100. Use of a hotstick is required for all overhead and underground applications.
The DVI-100T can be used in underground applications to measure elbow test points using the underground probe (IEP-DVI-5).
FEATURES
- For use on system voltages up to 161kV
- No range selector switch or settings required
- Large LED display indicates the line-to-ground voltage level
- Display is easy to read in bright or dark conditions
- Voltage readout allows user to distinguish between nominal and induced voltage levels
- Audible indication when voltage is detected
- Measure elbow test points with the DVI-100T
- Built-in universal spline for standard hotstick attachment
- Auto shut-off with low battery function
- Built-in self test to verify proper operation
- Powered by a field replaceable 9V lithium or alkaline battery
- No range selector switch or settings required
- Compact, rugged and lightweight polycarbonate housing
| Weight | 5.000000 |
|---|---|
| Product Includes | Kit Includes DVI-100T, (1) HP-DVI-2 Overhead Hook Probe, (1) IEP-DVI-5 Underground Busting Probe and CS-DVI Rugged Plastic Case |
| Specifications | Model Numbers: DVI-100 or DVI-100T OperatingVoltage Range: 0-99kV line-to-ground, auto-ranging Operating Frequency: 60Hz (50Hz available) Operating Temperature Range: -40°F to +120°F (-40°C to +49°C) Dimensions: Housing: 4.25”H x 7”L x 4.5”D (11cm x 18cm x 11cm) HP-DVI-2 Overhead Probe: 8”L (20cm) Weight: 1.37 lb. (0.62 kg) With Small Overhead Probe LED Height: 2.25”(6cm) Accuracy: Typical overhead line accuracy in compact overhead three phase configuration +/-10%, other applications up to+/-25% Power Supply: Field replaceable 9V lithium or alkaline battery Battery Life: About 100 readings with 9V alkaline battery |
| Manufacturer | HD Electric |
| MPN | DVI-100T/K01 |
| Mitchell Catalog Number | WBDVI100, 9UDVI100, 8UDVI100, 7UDVI100, |
