Mitchell Power Trace Circuit Tracer Kit MIT769

$695.00
Mitchell Part Number
MMJ-MIT769
Availability
Typically in stock, Call if Urgent
Quick overview

The Mitchell Power Finder Circuit Locating Kit is a new version of a tried and true circuit tracing system. The system is easy to set up and simple to operate. Microprocessor controlled components with no knobs or switches to set. The composite signal generated by the transmitter gives it a specialized 'signature' that reduces the noise or interference commonly associated with older circuit tracing systems.

What the Power Trace Circuit Tracer Can Do:

Traces: Power Lines, Neutral Lines, Ground Lines, Wires in Conduit, Underground Wiring, Wires in Walls or Under Carpet, Coax Cable, and Dead or Open Lines Finds: Circuit Breakers, Fuses, Shorts to Ground, Junction Boxes, Relays, Breaker Boxes, Breaks in Wires, Hidden Outlets

Finds: Circuit Breakers, Fuses, Shorts to Ground, Junction Boxes, Relays, Breaker Boxes, Breaks in Wire, Hidden Outlets

Tracing Live Circuits and Locating Circuit Breakers:

1) Plug the transmitter into the receptacle. Push the power button and green LEDs will flash three times. This is the battery check. The unit will then flash the LED that indicates the type of line you are connected to and send the appropriate signal on the line.

2) Push the receiver high range button. The unit will beep twice and the green power LED above the button will glow. The receiver will indicate a signal if within sensing range.

3) Move the receiver within a few inches of the transmitter. All five LEDs should flash and the unit will emit a beeping sound.

4) Take the receiver to the vicinity of the circuit breaker panel and press the high range button. If a signal is received, move the receiver toward the panel producing an increase in signal strength. Check all panels without resetting the receiver to find the strongest signal. This is the panel containing the breaker feeding the transmitter.

5) Open the panel door, push the low range button, and move the receiver over all the breakers. Next, move the receiver down the row of breakers until the LEDs flash. The breaker or fuse containing the strongest signal is the receptacle or device to which the transmitter is connected.

More Information
Weight 5.000000
Product Includes Transmitter, receiver, two alligator clips, AC blade, AC plug adapter, two extension leads, two 9V batteries, and carrying case
Specifications

Transmitter

  • Operating voltage: 0-600 Volts AC/DC
  • Current:  8mA Average
  • Frequency: 33.3 KHz
  • Operating Temperature  0-120F
  • Size: 5.5 x  2.75 x 1"
  • Power: Combination of line power and 9V Battery (Included)

 

Receiver

  • Power: Standard 9V battery (included)
  • Range: Live line mode--up to 20 feet from circuit
  • Open Line Mode-- normally 1 to 3 feet; further with proper ground
  • Size:  5.5 x 2.75 x 0.9"
Power Supply Four 'AA' Batteries
Manufacturer Mitchell Instrument
MPN MIT769
Manufacturer Warranty Limited Lifetime
Mitchell Catalog Number 7F201100521A, 8F201100521A, 9F201100521A, TSJ-MIT769
You're reviewing: Mitchell Power Trace Circuit Tracer Kit MIT769
Your Rating