Amprobe AT-7030 Advanced Wire Tracer Kit with Signal Clamp and Battery Boost

$0.00
Mitchell Part Number
AMP-4313854
Manufacturer
Availability
Out of Stock
Quick overview
Discontinued
  • The powerful Transmitter utilizes two optimal frequencies for both energized and de-energized wire and breaker tracing, delivering consistently accurate results for novice users and experts alike. 
  • The new Scan and Locate feature clearly identifies the one correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older technology tracing tools.
  • Traces wires in walls, ceilings,floors and corners
  • Locates breakers and fuses... the new Scan and Locate feature identifies the one correct breaker or fuse with the highest recorded signal. This eliminates the confusion from multiple false positive readings common in older technology tracing tools.
  • Trace energized wires without access to exposed conductors. The SC-7000 signal clamp accessory can be used with the AT-7000-T Transmitter to induce a signal into energized and de-energized wires when there is no access to bare conductors. Simply clamp around the desired wire to induce the signal, then begin tracing.
  • Pinpoints shorts and opens
  • High resolution 3.5” TFT LCD color display
  • Three power modes––”High” power mode for normal circuits––”Low” power mode for precision tracing in difficult areas––”Clamp” power mode provides a boosted signal using signal clamp
  • Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
  • Hot Stick attachment accessory enables easier tracing of wires in high ceilings, walls and along floors.
More Information
Weight 10.000000
Product Includes At-7000R receiver, AT-7000-T transmitter, Signal Boost Battery Pack (BR-7000-T), Signal Clamp (SC-7000) TL-7000 test leads, CC-7000 carrying case
Specifications

Specifications AT-7000-R Receiver AT-7000-T Transmitter SC-7000 Signal ClampTFT LCD Color Display size 3.5 in (8.89 cm) 1.77 in (4.5 cm) –TFT LCD Color Display Dimensions 2.76 x 2.07 in (7.01 x 5.26 cm) 1.1 x 1.38 in (2.79 x 3.51 cm) –TFT LCD Color Display Resolution 320px x 240px 128px x 160px –TFT LCD Color Display type TFT LCD RGB x TFT –TFT LCD Color Display • • –Backlight • • –mDDR 64 MB 64 MB –FLASH memory 128 MB 128 MB –Audio 95 dB – –Operating Temperature range 0 to 120˚F (-17.77 ˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C)Storage Temperature -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C)Operating Humidity 95% R.H max 95% R.H max 95% R.H maxOperating altitude 2000 m 2000 m 2000 mMeasurement Category CAT IV 600 V CAT IV 600 V CAT IV 600 VTransient protection – 8.00 kV (1.2/50 uS surge) –Pollution degree 2 2 2Drop test 3.28 ft (1 m) 3.28 ft (1 m) 3.28 ft (1 m)Power Supply 4xAA Alkaline battery90-270 V AC/DC, 40-400 HzAT-7030: BR-7000-T: LI-ION, 7.2 V, 2.2 AhAT-7020: 6x AA Alkaline Battery–Power consumption 4xAA battery: 2WAT-7030: BR-7000-T battery: 2WAT-7020: 6xAA battery:2WAC line voltage (Charging state): 10WAC line voltage: 3W–Charging voltage (BR-7000-T) – 85-270 V –Charging duration (BR-7000-T) – 16 h –Power up time 30 s 20 s –Non-Rechargeable Battery lifetime 9 h 9 h –Rechargeable Battery lifetime(BR-7000-T) – 10 h –Leakage current (non-rechargeable) 1.1 to 2.6 uA 6 to 14 uA –Leakage current (rechargeable) – 1.2 to 4 uA –IP Rating IP52 IP40 –Sampling rate6.25 kHz Signal: 62.5 kSPS32.768 kHz: 256 kSPSNCV: 62.5 kSPS62.5 kSPS –Signal Response Audible beep, bargraph display,numeric displayNumeric display –Response timeSmart mode: 750 msTip Sensor Energized: 300 msTip Sensor De-Energized: 750 msNCV: 500 ms, Battery monitoring: 5 sVoltage measurement: 1.5 sBattery monitoring: 5 sInstantaneousVoltage Measurement – 9-600 V, DC to 400 Hz –Non-Contact Voltage (NCV) 90-600 V AC – –LED Indicator Green Flashing: Signal DetectionRed: EnergizedOFF: De-EnergizedOrange: Over voltage–Operating Frequency Energized: 6.25 kHzDe-Energized: 32.768 kHzVoltage measurement: 40-400 HzEnergized: 6.25 kHzDe-Energized: 32.768 kHzEnergized: 6.25 kHzDe-Energized: 32.768 kHzAcoustic Indication 1 kHz Piezo Buzzer – –Range Detection (Open air) – – –Smart mode Pinpointing: Around 1.97 in (5 cm) radiusDirection indication: Up to 5 ft (152.4 cm)– –TIP Sensor: Energized Pinpointing: Around 1.97 in (5 cm)Detection: Up to 22 ft (670.56 cm)– –TIP Sensor: De-Energized Pinpointing: Around 1.97 in (5 cm) radiusDetection: Up to 14 ft (426.72 cm)– –NCV Detection: Up to 4 ft (121.92 cm) – –Current Output (Low) Energized – 53 mA rms –Current Output (High) Energized – 92 mA rms –Current output (Low)with BR-7000-T Energized– 53 mA rms –Current output (High)with BR-7000-T Energized– 120 mA rms –Voltage output (Low) De-Energized – 60 Vp-p –Voltage output (High) De-Energized – 120 Vp-p –Voltage output (Clamp) De-Energized – 180 Vp-p –Jaw Opening – – 2 in (5.08 cm)Fuse – 3.15A, 600V MAX, SLOW 5X20MM –Dimensions 10.92 x 4.43 x 2.55 in(27.75 x 11.25 x 6.483 cm)8.5 x 4 x 2.2 in(21.59 x 10.16 x 5.59 cm)8.2 x 3.2 x 1.68 in(20.83 x 8.13 x 4.27 cm)Weight 1.20 lb (0.544 kg) 1.30 lbs (0.593 kg) 0.648 lb (0.294 kg)

size 16 x 13 x 7 in
Power Supply Ten 'AA' Batteries
Manufacturer Amprobe
MPN AT-7030
Manufacturer Warranty 1 Year
upc code 095969664738
You're reviewing: Amprobe AT-7030 Advanced Wire Tracer Kit with Signal Clamp and Battery Boost
Your Rating