Dakota Ultrasonics ZX-6 Thickness Gauge

$1,895.00
Mitchell Part Number
DAK-ZX6
Availability
Typically in stock, Call if Urgent
Quick overview

The ZX-6 is a simple to use hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and coatings and eliminate the thickness of the paint or coating. The ZX-6 uses a dual element style transducer. The ZX-6 is equipped with a bundle of features to make the job eaiser: Alarm mode, high speed scanning, and data send are the main features of the ZX-6. The ZX-6 comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty.

 

Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.
Alarm Mode: Enter a minimum acceptable thickness value.
If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
Data Ouput: RS232 output sends thickness readings to a computer  or other external storage device

Pulse Echo Mode (Pit & Flaw Detection):
Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo Echo Mode (Thru Paint & Coatings):
Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).
Switch to select English or metric units.
Resolution: 0.001 inches (0.01 millimeters)
Velocity Range: .0492 to .3937 in/microsec (1250 to 10,000 meters/sec).
Built in: Stainless steel reference disk for probe zeroing.
Four readings per second for single point measure ments or 16 per second in scan mode — captures the minimum thickness.

Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Backlight is selectable: on / off / auto ( illuminates only when taking a measurement ).
Measurements displayed in inches, inches/microsecond. millimeters, and mters/second.
Bar graph indicates stability of reading.

More Information
Weight 2.000000
Product Includes standard dual element transducer, ultrasonic couplant, two ‘AA’ batteries and carrying case
Specifications

Physical
Weight: 10 ounces
Size: 2.5W x 4.75H x 1.25D inches (63.5W x 120.7H x 31.8D mm).
Operating Temperature: -20 to 120 °F (-20 to 50 °C)
Case: Extruded aluminum body / nickel plated aluminum end caps.
Keypad: Sealed membrane, resistant to water and petroleum products.
Power Source: Two “AA” size, 1.5 volt alkaline or 1.2 volt NiCad cells. 200 hours typical operating time on alkaline, 120 hours on NiCad.
Display: Liquid-Crystal-Display, 4.5 digits, 0.500 inch high numerals. LED backlight.
Measuring Range: 0.025 to 19.999 inches (0.63 to 500 millimeters)
Resolution: 0.001 inch (0.01 millimeter)
Accuracy: ±0.001 inch (0.01 millimeter), depends on material and conditions
Sound Velocity Range: 0.0492 to 0.3930 in/ms (1250 to 10000m/s)

Transducer (Standard Included)

Dual-element (transmit and receive).
1 to 10 MHz frequency range.
Locking quick disconnect LEMO connectors.
4 foot cable.
Custom transducers available for special applications.

 

size 2.5 W x 4.75 H x 1.25 D inches
Power Supply Two 1.5V alkaline or 1.2V NiCad AA cells
Manufacturer Dakota Ultrasonics
MPN ZX-6
Manufacturer Warranty 5 Year
You're reviewing: Dakota Ultrasonics ZX-6 Thickness Gauge
Your Rating