Amprobe AT-4005CON Advanced Wire Tracer Full Kit

Mitchell Part Number: JF-2734261

Availability: Typically In stock - Call if Urgent!

$1,127.95

Add Items to Cart Qty:

Quick Overview

The Amprobe AT-4005CON Advanced Wire Tracer is the deluxe kit of the new and improved circuit tracer family, AT-4000CON. This new series features one universal transmitter, the R-4000 CON, which automatically switches to work with either energized or unenergized systems. The AT-4005CON comes complete with transmitter, receiver, clamp-on attachment, battery booster with charger, and a soft carrying case.

Be the first to review this product

Extremely easy to use

One universal transmitter- automatically switches to work with either energized or non-energized systems

Receiver not position sensitive- does not need to be rotated in order to provide accurate readings

Traces live wires buried or hidden behind walls

Traces energized and non-energized (open, broken) wires

Performs tests without having to interrupt power

Locates breakers, neutrals, and ground lines

Locates and traces wires in walls, floors, conduit, computer cables, etc.

Pinpoints shorts, ground faults and broken wires

Does not interfere with sensitive electronic equipment

Precise sensitivity adjustment

Battery Booster strengthens signal for open tracing

Clamp-on attachment injects signal for non-contact operation

R-4000CON Receiver
It has two built in detectors that are tuned to pick up the 32.768Khz signals generated by the T-4000 transmitter. The R-4000CON is designed to display the signal strength to enable quick locating of the conductor carrying the signal.

T-4000 Transmitter
When connected to an energized circuit, the T-4000 will filter the low frequencies up to 400Hz and rapidly indicate on the display that the wire is energized. When the user starts the transmission, a combination of signals is injected on top of the 50, 60, or 400Hz that cause a slight, periodic current fluctuation and allows the power line to emit its own, traceable signal. This signal can be detected back to the main generator. However, the signal will not interfere with any sensitive electronic equipment and does not require power interruption. The unit is intrinsically safe and has a ‘LOW’ signal transmission setting that must be used when tracing GFCI-protected circuits.

Product Includes	Transmitter, Receiver, Pigtail Cordset, Alligator Clip Cordset, A2200 clamp-on, battery booster w/ charger and Carrying Case
Specifications	System Specifications Transmitter Operating Voltage: 9-600 VAC Operating Frequency: 32.786 kHz Receiver Range Short Mode (in air): 20’ in air from the traced wire under test conditions Receiver Range Open Mode (in air): 12’ in air from the traced wire under test conditions Operating Temperature: -18°C to 49°C (0 to 120°F) Storage temperature: -40° to 66°C (-40° to 150°F) Case Material: ABS Case Size: 14x6.7mm) 0.55” x 0.26”) Weight (AT-4005 CON): 8.20 lbs. R-4000 CON Receiver Detectors: Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up for open mode. Sensitivity: Low, Mid, High gain with precise sensitivity adjustment (thumbwheel). Short Mode performance: Over 20’ in air from the traced wire under test conditions. Open Mode performance: Over 12’ from the traced wire in air under test conditions. 50HZ, 60HZ, and 400HZ Rejection: 120db Power Source: 9V alkaline battery Display: 10 LEDs Case: Flame retardant ABS Weight: 0.5 Lb. (113g) T-4000 Transmitter Operating voltage: 9-600 volts Operating frequency: 32.768 KHZ Duty Cycle: Transmit 2 pulses with a duration of 0.0625S each, every 0.5 seconds Case: Flame retardant ABS Display: LCD (Liquid Crystal Display) Weight: 0.32 LB (143.5g) Current Output of the Signal: Low Mode: 11 mA average, 30 mA peak Medium Mode: 12 mA average, 36 mA peak High Mode: 13 mA average, 63 mA peak Fuse: Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM Signal Output (9V supply): High setting: 0.74 VAC Medium setting: 0.61 VAC Low setting: 0.53 VAC Battery: 9V alkaline- 24V jack will accept battery pack accessory (B2024 or B2025) A2202 Clamp-on Transmitter Accessory Operating Frequency: 32.768KHZ as supplied by T-4000 Case Breakdown Voltage: 3000 volts Maximum Wire size: 2000 MCM or 2” dia. Cable Battery: None, power is supplied by T-4000 B2024 Battery Pack T-4000 B2024 Battery Pack Type: Nickel-Cadmium rechargeable (20 AA cells) Capacity: 24-Volt, 600 mah Rechargeable Time: 14 hours Fuse: internal self-resetting B2025 Recharger/Converter Input: 115VAC Output: 24 VDC @350 mah
size	No
Shipping Weight	7.8000
Power Supply	Two 9V Batteries
Manufacturer	Amprobe
MPN	2734261
Manufacturer Warranty	1 Year
Mitchell Catalog Number	No
upc code	0 95969 36924 4