Amprobe DM-5 Power Quality Analyzer
Discontinued
Amprobe DM-5 Power Quality Analyzer Three Phase Kit
The Most Compact High Performance Power Quality Analyzer in its Class
Poor power quality is costly – not only can it drive up energy bills with excessive power usage, but equipment failure or damage caused by poor power quality is expensive and time- consuming to diagnose and repair. Productivity and process also suffer with faulty equipment or unscheduled outages. The new Amprobe DM-5 Power Quality Analyzer allows you to easily and quickly discover the source and magnitude of power quality issues.
At half the size of previous models, the compact DM-5 brings speed and efficiency to power quality jobs ranging from routine maintenance to in-plant troubleshooting of individual machinery and power distribution panels. Built for use in even the largest facilities, the DM-5 is safety tested to meet the world’s most prestigious safety standards and is rated to CAT IV 300 V, CAT III 600 V, CAT II 1000 V
- Simultaneously measures power, harmonics, waveform, power quality (voltage: 3-channel, current: 4-channel)
- Measures single and three-phase power system with 10 selectable wiring connection settings
- Test parameters voltage, current, active/reactive/apparent power, PF and frequency all on one screen
- Quick start mode, wiring check and auto current sensor detection for quick, accurate measurements
- Automatic recording with memory for up to 1,000 parameters at user defined intervals
- Includes thin flex current sensor with user selectable input ranges of 300 A, 1000 A, or 3000 A
- Energy consumption check: Trend and demand graphs for easy view
- Power quality events: Swell, Dip, Interruption, transients, Inrush current, and flicker
- Real-time remote monitoring on compatible PC and Android devices via Bluetooth communication
- Comes complete with measurement accessories, PC software, and large carrying case
- Safety rated CAT IV 300 V, CAT III 600 V, CAT II 1000 V
| Weight | 14.000000 |
|---|---|
| Product Includes | Test leads with alligator clips (4), US power cord, CT-53 flex AC current clamp, CT-500 flex AC current clamp, SD card, User manual, PC software, AA batteries (6) |
| Specifications | Measurements Wiring connection 1P2W, 1P3W, 3P3W, 3P4W Measurements and parameters Voltage, current, frequency, active power, reactive power, apparent power, active energy, reactive energy, apparent energy, power factor (cos ø), neutral current, demand, harmonics, quality (swell/dip/interruption, transients/overvoltage, inrush current, unbalance rate), capacitance calculation for PF correction unit, flicker Voltage (rms) Range: 600.0 / 1000 V Accuracy: ±0.2% + 0.2%f.s.(sine wave, 40 Hz to 70 Hz) Allowable input: 1% to 120% of each range (rms). 200% of each range (peak) Display range: 0.15% to 130 % of each range Crest factor: 3 or less Sampling speed of voltage transient: 24 μs Input impedance: approx. 1.67 M Ω Current (rms) Accuracy: ±0.2% + 0.2%f.s. + accuracy of flex current sensor (sine wave, 40 Hz to 70 Hz) Allowable input: 1% to 110% of each range (rms). 200% of each range (peak) Display range: 0.15% to 130 % of each range Crest factor: 3 or less Input impedance: approx. 100 k Ω Swell / dip / interruption Range: same as Voltage (rms) Accuracy: ±1.0% of nominal voltage Threshold value: In percentage of nominal voltage value Power and energy CT-53 flex current sensor (3-ch): max. 6000 kW CT-500 flex current sensor (1-ch): max. 1000 kW Active power accuracy: ±0.3% + 0.2%f.s. + accuracy of flex current sensor (PF 1, sine wave, 40 Hz to 70 Hz) Influence of power factor: ±1.0% (PF 0.5, 40 Hz to 70 Hz ) Wh: 0.00000 mWh to 9999.99 TWh VAh: 0.00000 VAh to 9999.99 TVAh varh: 0.00000 varh to 9999.99 Tvarh Power factor Display range: -1.000 to 0.000 to 1.000 Accuracy: ±1dgt against each calculated value (for sum: ±3dgt) Harmonics Harmonics order (n): 1 to 50th Inter-harmonics order (n): 1 to 50th Volts: 0.0% to 100.0%, accuracy ( ≥ 3% at 100 V nominal voltage): ±10% accuracy (<3% at 100 V nominal voltage): ±0.3% of nominal voltage accuracy (1000 V range): ±0.2% + 0.2%f.s Amps: 0.0% to 100.0%, accuracy ( ≥ 10% to max. input range): ±10% + flex current sensor. accuracy (<10% to max. input range): ±1.0% + flex current sensor Watts: 0.0% to 100.0%, accuracy: ±0.3% + 0.2%f.s. + accuracy of flex current sensor (PF 1, sine wave, 50/60 Hz) THD: 0.0% to 100.0%, Phase angle: 0.0° ⁰ to ± 180 ° ⁰ Flicker Displayed items: Pst(1min), Pst, Plt, Max Pst, Max Plt, V, time left Measurement method: Complied with IEC 61000-4-30 and IEC 61000-4-15 Ed.2 Accuracy: Pst (max.20): ±10% according to IEC 61000-4-15 Unbalance Volts: 0.00% to 100.00%, accuracy: ±0.3% at 50/60 Hz, sine wave (0.00% to 5.00% according to IEC 61000-4-030) Current: 0.00% to 100.00% Transient Approx. 40.96 ksps (every 2.4 μs) Range: 50 V to 2200 Vdc Accuracy: ±0.5% at 1000 Vdc Inrush current Range: same as Current (rms) Accuracy: ±0.4% + 0.4%f.s. + accuracy of flex current sensor Threshold value: In percentage of the measurement range Capacitance Range: 0.000 nF to 9999 F, 0.000 kvar to 999 kvar General Specifcations Display 3.5inch, TFT, QVGA(320xRGBx240) Display update Every 1 second* *There may be time lag in display update (max. 2 seconds) due to arithmetic processing. However, no time lag between the recorded data and the time stamp. Operating temperature and humidity 32°F to 113 °F (0 °C to 40 °C), ≤ 85 %RH (no condensation) Guaranteed accuracy at 73 °F ± 9 °F (23 °C ± 5 °C), ≤ 85 %RH (no condensation) Operating altitude 0 to 6,561 ft (0 to 2,000 m) Pollution degree 2 Dust/water proof IP 40 Drop proof 3.3 ft (1 m) Storage temperature and humidity -4 to 140 °F (-20 °C to 60 °C), ≤ 85 % RH (no condensation) Power supply Battery: 6 x AA 1.5 V Alkaline battery (LR6) AC power supply: AC100 V to AC 240 V, 50 Hz to 60 Hz, 7 VAmax. Battery life 3 hours (typical) Current consumption: 1.0 A at 3.0 Vdc (typical) EMC Meets EN 61326-1 Safety compliance UL/IEC 61010-1, IEC 61010-031, IEC 61010-2-030 Power quality measurement Complies with IEC 61000-4-030 ed.2 Class S |
| Power Supply | Li-Ion Battery |
| Manufacturer | Fluke |
| MPN | DM-5 |
| Manufacturer Warranty | one-year warranty |
