Mitchell Instrument Co. - best price for Test and Measurement, Safety, NFPA 70E Arc Flash

Skip to Main Content »

Search Site
For the Very Best Price, Call us at: (888) 270 2690

TSI 8475-03 Air Flow Transducer 3" omni directional probe

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • TSI 8475-03 Air Flow Transducer 3" omni directional probe

TSI 8475-03 Air Velocity Transducer 3" Omni Directional Probe

TSI Inc
See other TSI Inc products

Mitchell Part Number: TSI-8475-03

Availability: Typically In stock - Call if Urgent!

Regular Price: $1,590.00

Special Price: $1,431.00

Add Items to Cart Add to Cart

Quick Overview

8475-03 Air Velocity Transducer with 3" Omni Directional  probe is ideal for both temporary and permanent installations for air velocity measurements in small ducts or pipes is required. The full–scale range, signal output, and time constant are user selectable and can be easily changed to meet the needs of your application.

Be the first to review this product

OmniDirectional Probe







  • Omnidirectional probe tip

  • Accurate at low velocities from 10 to 100 ft/min (0.05 to 0.5 m/s)

  • Ideal for unknown or varying flow direction


See Specifications for additional information


Applications



  • Comfort and draft studies

  • Critical environment installations (e.g., clean rooms and hospitals)

  • Diffuser design analysis

  • Monitoring drying processes

  • Monitoring air flows in tunnels and subways

  • Used as a standard in wind tunnels and calibration facilities

  • Environmental monitoring in greenhouses and IAQ applications

  • General engineering applications

Product Includes Probe attached to 16.4-ft (5-m) cable connected to control module compression fittings for mounting in duct work, two holding clips to mount probe to parallel surface, operation and service manual and NIST calibration certifcate.
Specifications

Accuracy
±3.0% of reading2, ±1.0% of full scale of selected range
Field Selectable Range
10 ft/min to 100, 125, 150, 200, 250, 300, 400, 500 ft/min (0.05 m/s to 0.5, 0.75, 1.0, 1.25, 1.50, 2.0, 2.5 m/s)
Response to Flow
5 sec. For 63% of final value, tested at 500 fpm (2.5 m/s).
Temperature Range
Compensation 32 to 140°F (0 to 60°C)
Operating (electronics)
32 to 200°F (0 to 93°C)
Operating (sensor) 32 to 200°F (0 to 93°C)
Storage 32 to 200°F (0 to 93°C)
Resolution (minimum)
0.07% of selected full scale
Input Power
11 to 30 VDC or 18 to 38 VAC, 350 mA max6
Output
Impedance Voltage mode: less than 1 ohm, 20 mA max source current
Resistance Current mode: 500 ohms maximum load
Signal Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V,mA, 4 to 20 mA
Time Constant Field selectable 0.05 to 10 seconds

size 3.16" x 4.95" x 2.35", 3" x 0.25" probe on 16.4' cable
Shipping Weight 2.0000
Power Supply 11 to 30 VDC or 18 to 38 VAC, 350 mA max6
Manufacturer TSI Inc
MPN 8475-03

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.



Thank You For Shopping with Mitchell Instrument Company Inc.® - 1570 Cherokee St. San Marcos CA 92078 - Phone: (760) 744 2690 - Fax (760) 744 0083