TSI 8455-03 Air Velocity Transducer 3" General Purpose Probe

Special Price $850.95 Regular Price $915.00
Mitchell Part Number
TSI-8455-03
Manufacturer
Availability
Typically in stock, Call if Urgent
Quick overview

8455-03 Air Velocity Transducer with 3" probe is ideal for both temporary and permanent installations for air
velocity measurements in small ducts or pipes is required. The full–scale range, signal output, and time constant are user selectable and can be easily changed to meet the needs of your application.

General Purpose Probe

  • Wide measurement range selections
  • Protected probe tip
  • Rugged ceramic sensor
  • Wide range of measurement applications
  • Fast response time

See Specifications for additional information

Applications

  • Comfort and draft studies
  • Critical environment installations (e.g., clean rooms and hospitals)
  • Diffuser design analysis
  • Monitoring drying processes
  • Monitoring air flows in tunnels and subways
  • Used as a standard in wind tunnels and calibration facilities
  • Environmental monitoring in greenhouses and IAQ applications
  • General engineering applications
More Information
Weight 8.000000
Product Includes Probe attached to 16.4-ft (5-m) cable connected to control module compression fittings for mounting in duct work, two holding clips to mount probe to parallel surface, operation and service manual and NIST calibration certifcate.
Specifications

Accuracy
8455 ±2.0% of reading1, ±0.5% of full scale of selected range

Field Selectable Range
8455 and 8465 25 ft/min to 200, 250, 300, 400, 500, 750, 1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000,  7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0, 2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 m/s)

Repeatability
<±1.0% of reading3
Response to Flow
0.2 sec.4
Temperature Range
Compensation 32 to 140°F (0 to 60°C)
Operating (electronics)
32 to 200°F (0 to 93°C)
Operating (sensor) 32 to 200°F (0 to 93°C)
Storage 32 to 200°F (0 to 93°C)
Resolution (minimum)
0.07% of selected full scale
Input Power
11 to 30 VDC or 18 to 38 VAC, 350 mA max6
Output
Impedance Voltage mode: less than 1 ohm, 20 mA max source current
Resistance Current mode: 500 ohms maximum load
Signal Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V,mA, 4 to 20 mA
Time Constant Field selectable 0.05 to 10 seconds

size 3.16" x 4.95" x 2.35", 16.4' cable
Power Supply 11 to 30 VDC or 18 to 38 VAC, 350 mA max6
Manufacturer TSI
MPN 8455-03
You're reviewing: TSI 8455-03 Air Velocity Transducer 3" General Purpose Probe
Your Rating