AEMC 6470-B Multi Function Ground Resistance Tester - 500Ft. Kit

$0.00
Mitchell Part Number
AEJ-213504
Manufacturer
Availability
Out of Stock
Quick overview
Discontinued

AEMC 6470-B - 500 ft Ground Resistance Tester

  • 3-Point measurements of resistance to ground of ground rods and grids. 3-Point measurements are used when electrode or grid can be easily disconnected
  • 3-Point Earth coupling measurement and display. Used to estimate the influence of two earth resistance systems that are not connected to each other
  • 4-Point tests or soil resistivity measurements. Locating areas of lowest soil resistivity and is essential for achieving an economical grounding installation
  • Touch and step potential testing measurements. These tests are recommended when the ground cannot be disconnected, where ground faults are highly likely to occur, or when the “footprint” of grounded equipment (the outline of the part of equipment in contact with earth) is comparable to the size of the ground to be tested
  • 2- or 4-Wire tests for continuity tests on bonding or on grounding systems. Test is a DC resistive test using 250mA or more and is used to check bonding of all connection points on the ground system
  • Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments
  • Selectable test voltage 16 or 32V up to 250mA test current
  • Automatic recognition of all electrode connections and their resistance value
  • Stores up to 512 complete test results in internal memory
  • Optically isolated USB communication
  • Remote set up and operation of all measurements using DataView® software supplied
  • Rechargeable NiMH batteries from wall charger or vehicle power
  • Rugged dustproof and rainproof field
More Information
Weight 45.000000
Product Includes meter, rechargeable NiMH batteries, optical USB cable, power adapter 110/240V, four T-shaped auxiliary ground electrodes, set of five spaded lugs, one 100 ft tape measure, DataView® software, ground tester workbook CD CD, carrying bag for meter, carrying
Specifications

 

Range: 0.01 Ohm to 99k Ohms  Resolution: 0.01 Ohm
Accuracy: ±2%rdg. ±1ct
Test Voltage: 16 or 32VAC (selectable)
Test Current: up to 200mA
Test Frequency: 40 to 513Hz, manual or automatic selection in 3-point testing mode; selectable for 73, 91.5, 101, 110, or 128Hz in 4-point mode
Voltage Measurement: 1.00 to 75.0V AC/DC; DC to 500Hz
Memory: Up to 512 test results   
Physical: 9.4 x 12.8 x 4.3"; 7.5 lbs.
Display: Custom backlit 256 segment multi-line LCD
Safety: EN6101-1 50V Cat IV, Pollution Degree 2; CE mark

Manufacturer AEMC
MPN 6470-B Kit-500ft
Mitchell Catalog Number 7Z213504,8Z213504,9Z213504,WBZ13504
upc code 685338130201
You're reviewing: AEMC 6470-B Multi Function Ground Resistance Tester - 500Ft. Kit
Your Rating